Description
Features
Reviews
The GA75-10-11 contactors are designed for switching direct current and are constructed as block contactors. They have arc chambers with permanent magnets that are specially designed for switching direct current. The three current paths of the contactor are connected in series via two pre-installed insulated connectors. The GA75 is a single-pole contactor where the polarities indicated on the connection terminals must be observed. It is also marked 1L1 for the positive pole and 2T1 for the negative pole. It is also equipped at the factory with a 2-pole side auxiliary contact (1S+1NC). - Control circuit: AC operation with laminated magnetic circuit - Accessories: A wide range of other accessories is available.
| Property | Value |
| Connection type main circuit: | Screw connection |
| Number of auxiliary contacts as normally closed: | 1 |
| Number of normally open contacts: | 1 |
| Number of normally open contacts as main contacts: | 3 |
| Rated operating current Ie at DC-3 / DC-5 at 440 V: | 85 A |
| Rated control supply voltage AC 50 Hz: | 24 V |
| Rated control supply voltage AC 60 Hz: | 24 V |
| Suitable for Series installation: | no |
| Voltage type for actuation: | AC |
Features
Rated control supply voltage AC 50 Hz
24 V
HAB
GA75-10-11-81 24V 50/60Hz
Manufacturer
HAN
1SBL411025R8111
GTIN
3471522100818
Connection type main circuit
Screw connection
Number of auxiliary contacts as normally open
1
Number of auxiliary contacts as normally closed
1
Number of normally open contacts as main contacts
3
Suitable for series installation
No
Voltage type for actuation
AC
No reviews yet — your comment may be first.
All reviews 0
