Analog input, 2-way, AP
Enables the recording of 2 analog input signals. These include 0-1 V, 0-5 V, 0-10 V, 1-10 V, 0-20 mA, 4-20 mA, 0-1000 Ohm, PT100, PT1000, potential-free contact, KT, KTY and user-defined. Device illustration shows device without housing cover.
The analog input AE/A 2.1 is used to
record analog signals.
Two commercially available
sensors can be connected
to the AE/A 2.1. The connection to the bus
is made via a screw terminal
The device is ready for use after the bus voltage has been connected. No additional auxiliary voltage is required. The analog input AE/A 2.1 is parameterized and programmed using the ETS (from ETS2 V1.3a). The analog input AE/A 2.1 enables the recording and processing of two independent analog input signals. Functions of the application program: -Sensor output: freely adjustable sensor output signals -Measured value: can be displayed as a 1-bit, 1-byte, 2-byte or 4-byte value -Filtering: averaging over 4/16/64 measurements -Threshold: 2 per input, each with an upper and lower limit -Calculation: Comparison / arithmetic functions,
Averaging
Inputs2 independent sensor signals
in accordance with DIN IEC 60381
Connection of sensor output signals:
0 - 1 V, 0 - 5 V, 0 - 10 V, 1 - 10 V,
0 - 20 mA, 4 - 20 mA,
0 - 1000 Ohm,
PT 100, PT 1,000,
KT/KTY
User-defined input and
potential-free contact query
ConnectionsScrew terminals
Protection classIP 54, DIN EN 60 529
InstallationSurface-mounted
Dimensions100 x 100 x 50 (H x W x D)
Manufacturer ABB STOTZ-KONTAKT
Type AE/A 2.1
| Property | Value |
| Version: | Basic module |
| Number of inputs: | 2 |
| Protection class (IP): | IP54 |
| Mounting type: | Surface-mounted |
| Input voltage: | yes |
| Input current: | yes |
| KNX bus system: | yes |
| Radio bus system: | no |
| Powernet bus system: | no |
| LON bus system: | no |
| Other bus systems: | without |
| With LED display: | yes |
| With bus connection: | yes |
| Bus system KNX radio: | no |
