Three-phase meter for measuring a three-wire or four-wire three-phase network via a CT transformer connection (configurable transformer ratio for current) up to a maximum of 6 A. The following values are output via a seven-segment display with up to 7 digits: active energy (class 0, 5) and reactive energy (class 2) for import and export, power, currents, voltages (LL, LN), frequency, cos phi, power factor and apparent power, both per phase and total. Communication can take place via the integrated M-Bus interface or via the infrared interface for connecting a KNX module. The energy meter has 2 permanently configured inputs and outputs. The output can be used either as a pulse output to output active or reactive energy or as an alarm output. Up to 25 alarm values (threshold values with time delay) can be set here. The inputs are used to control the tariffs or to count external pulses. The resettable intermediate counter enables the measurement of individual intervals. The meter also records up to 4 tariffs. The meter is calibrated according to MID and approved according to IEC. The installation width is 4 DIN modules.
Property | Value |
Width in division units: | 4 |
Calibrated: | yes |
Pole type: | four-wire |
Meter type: | electronic |
Display type: | digital |
Mounting type: | REG |
Accuracy class: | C |
Protection class (NEMA): | other |
Maximum current (Imax): | 6 A |
Nominal voltage (Un) NL: | 230 to 240 V |
Pulse rate: | 1 to 999999 Imp/kWh (kvarh) |
Protection class (IP): | IP20 |
Frequency: | 50 to 60 Hz |
Tariff version: | Multi-tariff |
Tariff control: | external |
Energy type: | Active and reactive power |
Nominal current (In): | 1 A |
Version: | Measuring transformer |
Measurement type load profile: | no |
EDL40 signature: | no |
With lock code: | no |
Pulse type: | S0 |
Nominal voltage (Un) LL: | 380 to 415 V |
Number of digits: | 7 |
Suitable for: | Purchase/delivery |
Backstop: | yes |
Approval: | Measuring Instruments Directive |
Pulse output: | electrical |
Interface design: | M-Bus |