Impulse switches are electromagnetically operated devices with which simple, energy-saving and safe lighting control can be achieved. Impulse switches are usually controlled via impulse buttons where the light is to be controlled from at least three different locations. With each control pulse sent to the coil-magnet system, the device switches back to the previous position and holds it mechanically until the next control pulse. In the event of a power failure, it is guaranteed that the last switching position is mechanically held. This technology helps to significantly reduce the electrical power loss and power consumption of the devices. Due to the very quiet switching noise, impulse switches are also suitable for use in public buildings, hotels and private homes. Depending on the type, the devices can be controlled with common control voltages and are designed for a rated current of 16 A or 32 A.
| Property | Value |
| Width in modular spacing: | 1 |
| Rated switching current: | 16 A |
| Control voltage 1: | 230 V |
| Control voltage type 1: | AC |
| Control voltage 2: | 110 V |
| Control voltage type 2: | DC |
| Installation depth: | 68 mm |
| Function: | electronic for central control |
| Mounting type: | DIN rail |
| Frequency of control voltage 1: | 50 Hz |
| Type of supply voltage: | AC |
| Supply voltage: | 250 V |
| Max. incandescent lamp load: | 3000 W |
| Max. fluorescent lamp load: | 3000 VA |
| Max. fluorescent lamp load (duo circuit): | 2500 VA |
| Max. fluorescent lamp load (parallel compensated): | 2500 VA |
| Max. Switching current (cos phi = 0.6): | 16 A |
| Manual operation possible: | yes |
| Number of contacts as normally open: | 1 |
