Eden DYN (also with StatusBus), OSSD and AS-i are contactless safety sensors with coding, consisting of Adam and Eva. Eden is used on locked protective devices such as doors, gates and hoods and for safe position detection. They are ideal for harsh environments, have IP69K and a temperature range of -40 to +70 °C. There are versions with built-in, monitored reset with reset indicator. Eden DYN is suitable for single-channel DYNlink safety circuits with Vital or Pluto. Eden OSSD for two-channel safety circuits with safety relay or safety PLC. Eden AS-i are operated directly on the AS-i bus. Eden corresponds to type 4, optionally with high or low coding level according to EN ISO 14119 and reaches up to PLe (EN ISO 13849-1) or SIL3 (EN 61508, EN 62061), even with series connection/cascading of up to 30 sensors. Variable mounting and 360 ° scanning are possible.
Property | Value |
Rated supply voltage at DC: | 24.00 V |
Category according to EN 954-1: | 4 |
Suitable for safety functions: | yes |
Length of the sensor: | 12 mm |
Height of the sensor: | 60 mm |
Type of actuation: | Transponder |
Width of the sensor: | 30 mm |
Performance level according to EN ISO 13849-1: | Level e |
Protection class (IP): | IP67 |
Design of the interface for safety-related communication: | other |
Design of the electrical connection: | other |
Design of the switching output: | other |
Explosion protection category for gas: | without |
Explosion protection category for dust: | without |
Housing design: | special design |
Housing coating: | uncoated |
Secured switching distance OFF: | 25 mm |
Secured switching distance ON: | 10 mm |
Ambient temperature: | -40 to 80 °C |
Mechanical installation condition for sensor: | not flush |
Cross-circuit/short-circuit detection possible: | yes |
Switching distance: | 15 mm |
Type of voltage: | DC |
With monitoring function for downstream devices: | no |
Housing material: | plastic |
SIL according to IEC 61508: | 3 |
With status display: | no |
Protection class (NEMA): | other |