Description
Features
Reviews
The GA75-10-00 contactors are designed for switching direct current and are constructed as block contactors., They have arc chambers with permanent magnets that are specifically designed for switching direct current. The three current paths of the contactor are connected in series via two pre-installed insulated connectors., The GA75 is a single-pole contactor where the polarities indicated on the connection terminals must be observed. It is also marked 1L1 for the positive pole and 2T1 for the negative pole. No auxiliary contacts are installed at the factory., - Control circuit: AC operation with laminated magnetic circuit, - Accessories: A wide range of other accessories are available.
| Property | Value |
| Connection type main circuit: | Screw connection |
| Number of normally open contacts as main contacts: | 3 |
| Rated operating current Ie at DC-3 / DC-5 at 440 V: | 85 A |
| Rated control supply voltage Us at AC 50 Hz: | 230 to 240 V |
| Rated control supply voltage Us at AC 60 Hz: | 240 to 260 V |
| Rated control supply voltage Us at DC: | 0.0 V |
| Suitable for series installation: | no |
| Voltage type for actuation: | AC |
Features
HAB
GA75-10-00-88 230-240/50 240-260/60
Manufacturer
HAN
1SBL411025R8800
GTIN
3471522099884
Connection type main circuit
Screw connection
Number of normally open contacts as main contacts
3
Rated control supply voltage Us at AC 50 Hz
230 to 240 V
Rated control supply voltage Us at AC 60 Hz
240 to 260 V
Rated control supply voltage Us at DC
0.0V
Suitable for series installation
No
Voltage type for actuation
AC
No reviews yet — your comment may be first.
All reviews 0
