Description
Features
Reviews
The GA75-10-11 contactors are designed for switching direct current and are constructed as block contactors. They have arc chambers with permanent magnets that are specially designed for switching direct current. The three current paths of the contactor are connected in series via two pre-installed insulated connectors. The GA75 is a single-pole contactor where the polarities indicated on the connection terminals must be observed. It is also marked 1L1 for the positive pole and 2T1 for the negative pole. It is also equipped at the factory with a 2-pole side auxiliary contact (1S+1NC). - Control circuit: AC operation with laminated magnetic circuit - Accessories: A wide range of other accessories is available.
| Property | Value |
| Connection type main circuit: | Screw connection |
| Number of auxiliary contacts as normally closed contacts: | 1 |
| Number of normally open contacts as main contacts: | 3 |
| Rated operating current Ie at DC-3 / DC-5 at 440 V: | 85 A |
| Rated control supply voltage Us at AC 50 Hz: | 220 to 230 V |
| Rated control supply voltage Us at AC 60 Hz: | 230 to 240 V |
| Rated control supply voltage Us at DC: | 0.0 V |
| Suitable for series installation: | no |
| Voltage type for actuation: | AC |
Features
HAB
GA75-10-11 220-230V 50Hz / 230-240V 60Hz
Manufacturer
HAN
1SBL411025R8011
GTIN
3471522100801
Connection type main circuit
Screw connection
Number of auxiliary contacts as normally open
1
Number of auxiliary contacts as normally closed
1
Number of normally open contacts as main contacts
3
Rated control supply voltage Us at AC 50 Hz
220 to 230 V
Rated control supply voltage Us at AC 60 Hz
230 to 240 V
Rated control supply voltage Us at DC
0.0V
Suitable for series installation
No
Voltage type for actuation
AC
No reviews yet — your comment may be first.
All reviews 0
