The GAE75-10-00 contactors are designed for switching direct current and are constructed as block contactors., They have arc chambers with permanent magnets that are specifically designed for switching direct current. The three current paths of the contactor are connected in series via two pre-installed insulated connectors., The GAE75 is a single-pole contactor where the polarities indicated on the connection terminals must be observed. It is also marked 1L1 for the positive pole and 2T1 for the negative pole. No auxiliary contacts are installed at the factory., - Control circuit: DC operated with double winding coil (and factory-installed lagging break contact for switching on the holding winding), - Accessories: A wide range of other accessories are available.
| Property | Value |
| Connection type main circuit: | Screw connection |
| Number of normally open contacts as main contacts: | 3 |
| Rated operating current Ie at DC-3 / DC-5 at 440 V: | 85 A |
| Rated control supply voltage Us at AC 50 Hz: | 0.0 V |
| Rated control supply voltage Us at AC 60 Hz: | 0.0 V |
| Rated control supply voltage Us at DC: | 220 V |
| Suitable for series installation: | no |
| Voltage type for Actuation: | DC |
