Description
Features
Reviews
Combined pluggable surge protection device for RS485 interfaces, with connection options for 8 wires, tested in categories D, C, B according to IEC/EN 61643 for lightning-intensive environments, very slim design with 1TE width, can be snapped onto the 35mm top hat rail, for use in lightning protection zones LPZ 0 to 3, pluggable 12-way screw terminal up to 2.5qmm, replaceable protective module, practical earthing via the DIN rail.
| Property | Value |
| Signaling on the device: | without |
| Mounting type: | on base element |
| Nominal discharge current (8/20): | 10 kA |
| Nominal load current: | 0.3 A |
| Connection 1: | other |
| Maximum continuous voltage AC: | 16.7 V |
| Protection level wire/wire: | 55 V |
| Protection level wire/earth: | 55 V |
| Protection level Signal ground/protective ground: | 55 V |
| Protection level wire/signal ground: | 55 V |
| With remote signaling contact: | no |
| Explosion-tested version: | no |
| Arrester monitoring: | no |
| Frequency: | 45 MHz |
| Limit frequency: | 45 MHz |
| Nominal voltage AC: | 15 V |
| Lightning impulse current (10/350 µs): | 1.25 kA |
Features
Explosion-tested version
No
Lightning surge current (10/350 µs)
1.25 kA
With remote signaling contact
No
Connection 1
Other
Nominal load current
0.3 A
Protection level wire/wire
55 V
Protection level wire/earth
55 V
Limit frequency
45 MHz
HAB
OVR-RS485Q
Minimal order
5 pieces
Manufacturer
HAN
7TCA085400R0312
GTIN
5415022374322
Frequency
45MHz
Highest continuous voltage AC
16.7V
Mounting type
On base element
Nominal discharge current (8/20)
10kA
Nominal voltage AC
15V
Signaling on the device
Without
No reviews yet — your comment may be first.
All reviews 0
