The phase busbar allows quick and error-free wiring of the load side of ABB i-bus® modular devices, thereby reducing the wiring effort.
Busbar, 1 phase, 60 contacts
The phase busbar allows quick and error-free wiring of the load side of ABB i-bus® modular devices, thereby reducing the wiring effort.
The phase busbar allows quick and error-free wiring of the load side of ABB i-bus® modular devices, thereby reducing the wiring effort.
The phase busbar is an aid for cross-connecting ABB i-bus®
devices with 6 mm2 terminals (e.g. SA/S 10/16/20A, SD/S, LR/S 4.16.1 etc.).
It is suitable for Wiring in the distributor and in the control cabinet.
The rail can be shortened to supply any number of circuits
with just one feed.
The end cap PS-END 1-S must be placed on the end of the rail
to avoid touching live parts.
Rated current40 A
Rated voltage250/440 V
Cu cross-section6 mm2
Length1037 mm (60 contact pins)
ManufacturerABB STOTZ-KONTAKT
TypePS 1/60/6-KNX
| Property | Value |
| Number of poles: | 60 |
| Number of phases: | 1 |
| Length: | 1037 mm |
| Cross-section: | 6 mm² |
| Rated continuous current Iu: | 40 A |
| Max. Rated operating voltage Ue: | 400 V |
| Number of pitch units: | 60 |
| Insulated: | yes |
| Suitable for number of devices: | 60 |
| Suitable for devices with N conductor: | no |
| Pitch dimension: | 15.2 mm |
| Rated short-time withstand current Icw: | 25 kA |
| Suitable for devices with auxiliary switch: | no |
| Conditional rated short-circuit current Iq: | 25 kA |
| Design of the electrical connection: | Pin |
| Rated impulse voltage: | 4 kV |
