The device is used to record up to 100 fault messages via ABB i-bus®. Fault messages are processed in the module and forwarded to a display. The SMB/S 1.1 supports the message types specified in DIN 19 235.
Fault message module, REG
The device is used to record up to 100 fault messages via ABB i-bus®. Fault messages are processed in the module and forwarded to a display. The SMB/S 1.1 supports the message types specified in DIN 19 235.
The fault message module SMB/S 1.1 is used to record up to 100 fault messages
via ABB i-bus® EIB / KNX. The fault messages are processed in the module
and can be forwarded to an optical display
via ABB i-bus® EIB / KNX. Furthermore, an optical and an acoustic collective message is available. Messages can be acknowledged and data losses are reported. Sensors can be monitored cyclically.
The SMB/S 1.1 supports the following message types defined in DIN 19 235:
1.Message with continuous light
2.New value message with single flashing light
3.First value message with single acknowledgement
4.Motor message
The current values can be queried centrally. The connection to the bus
is established via the bus connection terminal.
Bus connection via bus connection terminal
Protection class IP 20, DIN EN 60 529
Installation on 35 mm mounting rail, DIN EN 60 715
Width 2 modules 18 mm
Manufacturer ABB STOTZ-KONTAKT
Type SMB/S 1.1
| Property | Value |
| KNX bus system: | yes |
| Radio bus system: | no |
| Powernet bus system: | no |
| Mounting type: | REG |
| Width in modular units: | 2 |
| LON bus system: | no |
| Other bus systems: | without |
| With bus connection: | yes |
| Logical module: | yes |
| KNX radio bus system: | no |
