Properties: The series consists of 9 enclosures based on grid dimensions of 185 and 300 mm. The housing bases are made of hot-pressed, glass-fiber-reinforced polyester, colored through (RAL 7035). They are provided with insert nuts (M4) for attaching the mounting plate or a mounting frame. The covers are made either of hot-pressed, glass-fiber-reinforced polyester, colored through (RAL 7035) or of transparent polycarbonate. APO enclosures ensure optimum safety for operating personnel and built-in devices thanks to their protective insulation and protection class of up to IP67 in accordance with EN/IEC 60529. Impact resistance IK10 against external mechanical stress in accordance with EN/IEC 62262. Each larger enclosure is a multiple of a smaller enclosure. The fastening points are also a multiple of the smaller enclosure. These fastening points are designed as a core hole to accommodate M4 insert nuts. In addition, there are 4 to 6 core holes in each base for the insertion of M6 insert nuts. APO housings are designed for both wall and mast mounting. The housing can be machined using conventional methods such as drilling, milling, sawing, punching, etc. Environmental conditions: temperature resistant up to 70°C continuous temperature (peak temperatures up to 130°C, transparent polycarbonate covers up to peak temperatures of 120°C). Rated insulation voltage Ui = 1000V. APO housings are UL listed, according to UL Standard 508 and CSA approved according to C22.2 No. 94, available on request.
| Property | Value |
| Type of accessory: | other |
