Instantaneous water heater, electronically controlled, for supplying wash basins, kitchen sinks, showers and bathtubs. Fast control electronics. Temperature selection accurate to the degree (from 30 °C to 60 °C) thanks to an easy-to-read LC display. Suitable for solar power for inlet temperatures up to 60 °C. Integrated diagnostic system, electronic air detection. Heating block made of glass-fiber-reinforced polyamide. 4 heating coils located directly in the water. Measuring turbine for precise flow rate measurement. Connection options for remote and direct tapping. For connection to VPE plastic pipes with DVGW test mark. Simple installation thanks to separate mounting plate and twist lock, with installation template, cover removal from the front, without screws, electrical connection from above or below. Power supply with fixed connection. Can be installed above the counter or under the counter with the UT 104 accessory. Can be connected to all commercially available closed fittings. Quality and safety marks: CE mark, VDE / GS mark, radio protection mark / EMC.
| Property | Value |
| Energy efficiency class: | A |
| Rated power: | 18 kW |
| Connected load: | 24 kW |
| Rated voltage 1: | 380 V |
| Rated voltage 2: | 400 V |
| Heating system: | Bare wire |
| Height: | 485 mm |
| Width: | 226 mm |
| Depth: | 93 mm |
| Weight: | 3.6 kg |
| With display: | yes |
| Temperature display: | digital |
| Type of control: | electronic |
| Protection class (IP) : | IP25 |
| Mounting type: | Over counter/under counter |
| With fitting: | no |
| Operation: | manual |
| Nominal capacity: | 0.4 l |
| Material of pressure vessel: | plastic |
| Safety shutdown: | Pressure shutdown |
| Suitable for preheated Water: | yes |
| Suitable for KNX: | no |
