Instantaneous water heater, electronically controlled, for connection in the kitchen together with the electric stove to a stove connection box with good temperature comfort. Temperature selection (from approx. 30 °C to 60 °C). Heating block made of glass fiber reinforced polyamide. 4 heating coils located directly in the water. Measuring turbine for precise flow rate measurement, electronic air detection. Largely constant outlet temperatures despite pressure and inlet temperature fluctuations. Continuous temperature adjustment with application symbols. Connection options for remote and direct tapping. For connection to VPE plastic pipes with DVGW test mark. Easy installation with separate mounting plate and twist lock, with installation template, hood removal from the front, without screws, electrical connection from above or below. Power supply with fixed connection. Over-sink installation, under-sink installation possible with accessory UT 104. Connection to all commercially available closed fittings. Additional accessories: connection set for stove.
| Property | Value |
| Energy efficiency class: | A |
| Connected load: | 11 kW |
| Nominal voltage 1: | 380 V |
| Nominal voltage 2: | 400 V |
| Heating system: | Bare wire |
| Height: | 485 mm |
| Width: | 226 mm |
| Depth: | 93 mm |
| Weight: | 3.6 kg |
| With Display: | no |
| Temperature display: | without |
| Type of control: | electronic |
| Protection class (IP) : | other |
| Mounting type: | Over counter/under counter |
| With fitting: | no |
| Operation: | manual |
| Nominal capacity: | 0.4 l |
| Material of pressure vessel: | plastic |
| Safety shutdown: | Pressure shutdown |
| Suitable for preheated Water: | no |
| Suitable for KNX: | no |
