Alre-It H9100000 ZBOOA-040.100 24V normally closed actuator

Housing dimensions: 57 x 39 mm,, 536891,4050528028358,Terminal block in the housing for wiring up to 5 room thermostats and max. 20 actuators. A maximum of 4 actuators are possible per channel.,, 536892,4050528028341,Terminal block for a maximum of 8 room thermostats and 32 actuators.,, 536895,4050528019264,Single-stage industrial room thermostat, mechanical, AP, 0...35°C, TR, changeover contact.,, 536896,4050528019271,Single-stage industrial room thermostat, mechanical, AP, 0...35°C, TW, changeover contact.,, 536897,4048879182409,M12 St. 0° / M12 Bu. 0° PUR 5x0.34 gr UL/CSA 0.6m,, 536898,4048879020367,Interference suppression module for switching devices RC, 24 VAC/DC, 20 VA/W CF-RC-24/15-U,, 536899,2000005368998,Electrical energy meter with DIN rail mounting for 3-phase networks. Direct connection up to 100 A ,, 536923,8021183010671,Inverter technology, therefore no external unit necessary,Can be used as a wall-mounted or chest unit,Cooling capacity 3.1 kW max.,Air circulation 490 m/h,Dehumidification capacity 1.1 l/h,For room volumes up to 85 m,Dimensions (HxWxD): 50.6x90x23 cm,Colour: white,, 536924,4013960332193,The multimedia pipe is an oval-shaped plastic corrugated pipe made of polyolefin, in the colour grey. Scope of delivery: 1.5m set: 1.5m oval pipe, 2 outlet boxes, 2 end caps 2 x 1.5m set: 2 x 1.5m oval pipe, 2 outlet boxes, 2 end caps, 1 connecting sleeve. This multimedia pipe is used for flush-mounted installation. The 1.5m set for living rooms and the 2 x 1.5m set for meeting rooms, hospitals and schools. The advantage is that the cable with plug can be replaced and the multimedia outlet box can be positioned later. Low installation depth of 6cm due to the oval shape of the pipe. Temperature resistance -5°C to +90°C,, 536925,2000005369254,according to DIN0276-620Construction: Multi-wire aluminum conductor, core insulation made of cross-linked PE, common copper shield, longitudinally watertight, PE outer jacket, color: blackUse: For laying in the ground, in water, outdoors, indoors and cable ducts for utility networks, industry and distribution networks, when laying in cable ducts and indoors it must be taken into account that the PE jacket is not flame-retardant according to DIN0482-332-1, the cable is suitable for unfavorable operating conditions, especially if the penetration of water in the longitudinal direction is to be avoided after mechanical damage.,, 536928,4012932122589,CONNECT > SWITCH ON > START MEASUREMENT > READ > DONE!Using a patented process The test device can determine the peak power, the series internal resistance and the parallel internal resistance directly at the installation site with just one measurement and without specifying the module data and display them on the high-resolution touch color graphic display suitable for sunlight. Both troubleshooting in a PV system and the documentation of the system quality are carried out quickly and economically without a long training period during commissioning and also during subsequent checks. This simple and informative test serves the customer's safety and saves follow-up costs for the installer. The measured peak power can also be used, for example, to determine the performance ratio. The recorded characteristics also provide further information about the electrical properties of the module or string being measured. This is why the tester is also suitable as an instrument in research and development.