Description
Features
Reviews
Wind vane relay for monitoring air flow in ducts, in supply and exhaust air devices of fans or electric heating registers. The wind vane relay is factory-set to the minimum switching points. The switch-on/switch-off values can be increased by turning the internal screw to the right. Installation takes place in vertical paddle position from above in a horizontal pipe/duct. The setting range is 2m/s . 9.2m/s and the hysteresis is approx. 1m/s.
| Property | Value |
| Number of switching points: | 1 |
| Depth: | 71 mm |
| Adjustable response value for flow in gases: | 2 to 9.2 m/s |
| Protection class (IP), measuring head: | IP20 |
| Height: | 67 mm |
| Protection class (IP), evaluation electronics: | IP65 |
| Suitable for liquids: | no |
| Measuring head integrated in the device: | yes |
| Width: | 130 mm |
| Transistor output: | no |
| Suitable for gases: | yes |
| Design of the electrical connection: | screw connection |
| Rated control supply voltage Us at AC 50 Hz: | 230 V |
| Measuring head included: | yes |
| Ambient temperature for evaluation electronics: | -40 to 80 °C |
| Measuring principle: | other |
| Medium temperature: | -40 to 85 °C |
| Number of contacts as changeover contact: | 1 |
Features
HAB
JSL-1E +40° to +80°C
Manufacturer
HAN
JA070100
GTIN
4050528047144
Number of contacts as changeover
1
Design of the electrical connection
Screw connection
Rated control supply voltage Us at AC 50 Hz
230V
Width
130 mm
Height
67 mm
Depth
71 mm
No reviews yet — your comment may be first.
All reviews 0
