Benning CM 10-1 True RMS current clamp multimeter for professional use in industry, service and trade. Digital display. 4-digit LCD display (6000 points). With screen backlight. Voltage measurement/AC 0.1 V - 1000 V. Voltage measurement/DC 0.1 mV - 1000 V. Current measuring range/AC 0.01 A - 1500 A. Current measuring range/DC 0.01 A - 1500 A. Current type direct/alternating current. Precise current measurement up to 1500 A AC/DC. Resistance measuring range 0.1 Ohm - 600 kOhm. Continuity test yes. Diode test yes. True RMS measurement (TRMS) yes. Frequency measurement 0.01 Hz - 10 kHz. Frequency measurement yes. Capacitance measurement 0.1 F - 1000 µF. Capacitance measurement yes. Data logger and storage function (4000 measured values). Bluetooth Low Energy 4.0 interface for measured value transmission. Free IOS and Android app BENNING MM-CM Link for downloading, saving and sharing measured values via smartphone/tablet. AutoV function with low input impedance (LoZ) to suppress reactive voltages. INRUSH inrush current measurement for measuring inrush currents (motors, etc.). Low-pass filter (HFR high-frequency suppression, 800 Hz) for measurements on clocked motor drives. Measuring input for flexible current transformer BENNING CFlex 1 up to 3000 A AC (option). Volt sensor for contactless phase and cable break testing (red LED). Automatic measuring range selection. Automatic switch-off. Automatic battery undervoltage display. Instantaneous value memory Hold. Maximum value memory MAX. Minimum value memory MIN. LED measuring point illumination. Clamp opening 42 mm. Measuring circuit category Cat IV. Max. voltage measuring circuit category 600 V. Measuring circuit category Cat III. Max. voltage measuring circuit category 1000 V. Non-slip and break-proof SoftGrip housing. Includes case, measuring leads, wire temperature sensor, 2 x 1.5 V Mignon/AA/LR6 batteries.
Property | Value |
Power measurement: | no |
Current measuring range/DC: | 0.01 to 1500 A |
Current measuring range/AC: | 0.01 to 1500 A |
Clamp opening: | 42 mm |
True RMS measurement (TRMS): | yes |
Leakage current measurement: | no |
Harmonics measurement: | no |
Measurement in cable with forward and return conductor: | no |
Version as adapter for connection to Multimeter: | no |
Interface: | yes |
Voltage measurement/AC: | yes |
Voltage measurement/DC: | yes |
Resistance measuring range: | yes |
Display: | digital |
Analog bar display: | no |
Measuring range selection: | automatic |
Measuring circuit category: | CAT IV |
Continuity test: | yes |