DUSPOL expert. Voltage tester. Suitable for electrical engineering, industry, maintenance, service (troubleshooting), photovoltaic/wind power plants and hybrid vehicle technology. Test type 2-pole. Voltage display LED. Voltage measuring range 12 V - 1000 V AC/DC. Voltage display from 50 V even with empty batteries. Display levels 12, 24, 50, 120, 230, 400, 690, 1000 V AC/DC. Phase rotation indicator yes, green LED. Continuity test yes. Continuity display optical/acoustic yellow LED/buzzer. Continuity test range 0 kOhm - 100 kOhm. Polarity display yes, LCD. Single-pole phase display yes, red LED. Non-contact voltage detection yes, yellow LED flashing. Direct display without pressing a push button, high-resistance test. Load connection via push button, low-resistance test. Intentional triggering of the RCD/FI circuit breaker. Vibration alarm in the test handle. Measuring point illumination yes. Internal base load yes. Load can be switched on yes. Can be used in precipitation yes, protection class IP 65 dust-tight, protected against water jets. Robust housing design with rubberized grip surface. Tested and approved according to DIN EN 61243-3,0682-401:2015. Measuring circuit category Cat IV. Max. voltage measuring circuit category 600 V. Measuring circuit category Cat III. Max. voltage measuring circuit category 1000 V. Length 260 mm. Blade length 15 mm. Blade width 2 mm. Power supply with and without battery. Includes 2 x 1.5 V Micro/ AAA/ LR03 battery, measuring tip protection.
| Property | Value |
| Length: | 260 mm |
| Voltage display: | LED |
| Voltage measuring range: | 12 to 1000 V |
| Internal base load: | yes |
| Continuity display: | optical/acoustic |
| Single-pole phase display: | yes |
| Contactless voltage detection: | yes |
| Instantaneous value memory (Data Hold): | no |
| LC display backlight: | no |
| Measuring tip protection: | yes |
| Measuring point illumination: | yes |
| Test type: | 2-pole |
| Load can be switched on: | yes |
| Rotation field direction indicator: | yes |
| Power supply: | with and without battery |
| Measuring circuit category: | CAT IV |
| Continuity test: | yes |
| Blade width: | 2 mm |
| Blade length: | 15 mm |
| Can be used with Precipitation: | yes |
