Control changeover switch with imprint heating emergency switch AP W.1 gray. Control changeover switch with imprint - heating emergency switch - with lens AP, off/changeover, IP55. For control circuit, with blue LED unit 230 V for switch/button, with N terminal, with plug-in terminals, with an entry for 2 cables and an entry for cable or pipe, full-surface seal under the housing base to seal the rear of the housing, easily accessible, funnel-shaped mounting holes in the housings, a Wago 2-wire connection terminal for wiring included, two snap-in positions for Wago 2-wire connection terminals in the housing base, plenty of space for wiring under the bases of the inserts (hollow floor), easy installation of the insert in the housing by snapping it into place, secure fixing of the frame to the housing via bayonet quick release. Not suitable for heating systems > 50 kW. Housing screws made of stainless steel. Surface-mounted installation. Material: plastic, thermoplastic, impact-resistant.
Property | Value |
Color: | gray |
Suitable for protection class (IP): | IP55 |
Circuit type: | Toggle switch |
Operating method: | Rocker/button |
Number of actuating rockers: | 1 |
Mounting type: | Surface-mounted |
Push button: | no |
Composition: | Basic element |
Fastening type: | Screw fastening |
Material: | Plastic |
Material quality: | Thermoplastic |
Halogen-free: | yes |
Surface: | untreated |
Surface finish: | matt |
RAL number (similar): | 7011 |
Nominal voltage: | 250 V |
Switching current for fluorescent lamps: | 10 AX |
Feedback contact: | no |
Connection type: | Plug-in terminal |
Rated current: | 10 A |
Device depth: | 41.6 mm |
Device width: | 70.8 mm |
Device height: | 70.8 mm |
With mounting plate: | no |
Text field/labeling area: | no |