Universal dimmer actuator 1-way REG KNX - , Operating voltage via bus 21 ... 32 V=, - Auxiliary voltage 230 V~ - Control voltage 110 ... 230 V~ - Frequency 50/60 Hz - 230 V incandescent and halogen lamps 20 - 500 W - electronic transformers 20 - 500 W - dimmable conventional transformers 20 - 500 VA - Operating temperature -5 ... +45 °C - REG 4 TE - Dimensions (W x H x D) 72 x 90 x 70 mm - Installation height from top hat rail 63 mm Trouble-free operation only possible with Berker Tronic transformers. Do not connect conventional transformers together with electronic transformers. - lamp-protecting soft start - short-circuit proof and overload proof (electronic fuse) - phase leading or trailing edge depending on the type of load, self-learning - can also be used as a speed controller for single-phase motors - 4 manual control buttons for on/off (up/down) and bus function on/off per channel/device - manual operation also possible without bus, e.g. on construction sites - staircase function with pre-warning function in accordance with DIN 18015-2 - operating hours counter as up or down counter per channel - with programming button and red programming LED - bus connection via connection terminal - with screw terminals
| Property | Value |
| Width in modular units: | 4 |
| Mounting type: | REG |
| Number of outputs: | 1 |
| Output power: | 20 to 500 W |
| Voltage: | 30 V |
| Frequency: | 50 to 60 Hz |
| Design: | Dimmer actuator |
| Load type: | universal |
| Protection class (IP): | IP20 |
| Power supplement usable: | yes |
| KNX bus system: | yes |
| Radio bus system: | no |
| Powernet bus system: | no |
| With bus connection: | yes |
| LON bus system: | no |
| Other bus systems: | without |
| Extension input: | no |
| Local/manual operation: | yes |
| With LED display: | yes |
| Parallel operation possible: | no |
| Bus system KNX radio: | no |
| Bus module removable: | no |
| Radio bidirectional: | no |
