Fan coil actuator 2-way 10 A normally open, manual, status, REG KNX light gray, operating voltage via bus 21 ... 32 V=, auxiliary voltage 230 V~ Max. switching capacity for 230 V~ 230 V incandescent lamps 2300 W 230 V halogen lamps 2300 W conventional transformers 1200 W electronic transformers 1500 W fluorescent lamps uncompensated 1000 W fluorescent lamps parallel compensated 1160 W/140 F Operating temperature -5 - 45 °C REG 4 TE Dimensions (W x H x D) 72 x 90 x 70 mm Installation height from top hat rail 63 mm Observe the instructions of the fan coil unit manufacturer! Optimized for commissioning with ETS3 from version D patch A. - for electrical control of fan coil units - for converting RTR control variable telegrams into valve positions, fan speeds - control of 1 or 2 fan channels with 6 or 3 fan speeds - for heating, cooling, heating and cooling operating modes - manual control of blower fans via touch sensors or control panels - use of free channels to control switching loads - 4 manual control buttons for controlling valves/fan speeds and bus function on/off - manual operation also possible without a bus, e.g. on a construction site - with programming button and red programming LED - with 8 red status LEDs and 3 red LEDs as manual operation display - bus connection via connection terminal - with screw terminals
| Property | Value |
| Width in modular spaces: | 4 |
| Number of outputs: | 8 |
| Switching voltage: | 230 to 240 V |
| KNX bus system: | yes |
| Max. switching current (ohmic load): | 10 A |
| Max. Output current: | 10 A |
| Protection class (IP): | IP20 |
| Bus system radio bus: | no |
| Bus system LON: | no |
| Bus system Powernet: | no |
| Other bus systems: | without |
| Mounting type: | REG |
| With bus connection: | yes |
| Control variable continuous: | no |
| Control variable switching: | yes |
| Valve protection function: | yes |
| Manual control: | yes |
| Bidirectional radio: | no |
| Removable bus module: | no |
| KNX radio bus system: | no |
