Bticino 364617 Door intercom set FlexONE Video SFERA CLASSE100 V16E

FlexONE video set with SFERA door station and CLASSE 100 V16E house station. The set in 2-wire technology contains all the parts required to create a single-family house intercom system. The extension to a two-family house is done by adding a second house station of your choice. The set consists of:- 1 flush-mounted SFERA door station in the Allmetal version. Supplied with 2 front panels (1 and 2 call buttons) and can therefore be configured as a single- or two-family house. Equipped with a color camera with 1/3 sensor (image area 135° horizontal/96° vertical) including LEDs for illuminating the recording area and anti-fog heating (heating resistor). Name plate including integrated brightness sensor for automatically switching on the background lighting (white LEDs) in the dark. Status LEDs for the operating states: door open, communication active, call made and system occupied. The door opener (max. 30 Ohm internal resistance) is connected directly to the terminals S+ and S- (18 V, 4 A surge current, 250 mA holding current). Protection class IP 54, impact resistance IK 08, dimensions: W × H: 138 × 144 mm, color: similar to RAL 9018- 1 video power supply unit- 1 handset-free surface-mounted house station CLASSE 100 V16E with induction loop for hearing aid wearers2-wire bus system, color LCD display 5 (12.7 cm), with induction loop for hearing aid wearers, free two-way communication, in addition to the two physical call buttons (accept or end call), it has 3 sensor buttons for the functions: open door, switch on stairwell light (activator order no. 346210 is required) and switch door station on or over. It also contains 4 freely configurable additional buttons (e.g. for internal speaking, additional door opener, etc.). 16 melodic ring tones can be set. Incl. doctor connection/door automat function. For door/floor call with call differentiation. The volume of the ring tone and conversation as well as the color and brightness of the screen are set via the OSD menu, which is operated via a control on the side. LED display for: ring tone deactivation, door opener and connection status. Surface mounting using the wall bracket supplied. A table accessory (2 pieces of order no. 344692 are required) is available separately. Connection for BUS, floor call and additional bell. Dimensions W × H × D: 164 × 165 × 18.5 mm - circuit diagram and operating instructions