Busch-Wächter Presence tech BasicLINE mini, alpine white, motion/presence detector, presence detector, Busch-Wächter Presence tech BasicLINE mini For brightness and movement-dependent switching of lighting. Detection range (at 3 m installation height) circular, up to 6 m in diameter. Low installation height thanks to separate sensor/actuator concept. Detection sensitivity continuously adjustable. With brightness-independent test mode for evaluating the detection range. With detection display in test mode. Ceiling installation via integrated spring clip. Monitoring density: 19 sectors with 76 switching segments. Switch-off delay: approx. 1 min. - 15 min. or short-term pulse adjustable. Nominal voltage: , +10 % / -10 % Nominal frequency: 50 Hz Outputs: 1x normally open contact, non-potential bound Load type: 230 V incandescent lamps Nominal power: 2000 W Load type: energy saving lamps Nominal power: 7 - 400 W Load type: fluorescent lamps Nominal current: 4 AX, at cos 0.5 Nominal power: 1000 W/VA Opening angle: 360 ° Brightness limit: 10 Lux - 1000 Lux , day operation Mounting height: 2 m - 5 m Protection class device: IP 20 Protection class sensor: IP 40 Temperature range device: 0 °C to 45 °C Installation depth: 77 mm IEC 60669-2-1
| Property | Value |
| Depth: | 80 mm |
| Width: | 38 mm |
| Height: | 38 mm |
| Version: | Presence detector |
| Color: | white |
| Nominal voltage: | 230 V |
| RAL number (similar): | 9010 |
| Material: | Plastic |
| Mounting type: | other |
| Response brightness: | 10 to 1000 lx |
| Protection class (IP): | IP20 |
| Max. switching capacity: | 2000 W |
| Voltage type: | AC |
| Max. range to one side: | 3 m |
| Scan angle: | 360 ° |
| Suitable for wall mounting: | no |
| Min. duty cycle: | 60 s |
| Max. Duty cycle: | 15 min |
| Creep-under protection/rear field monitoring: | yes |
| Temperature: | 0 to 45 °C |
| Adjustable response brightness: | yes |
| Adjustable response sensitivity: | yes |
| Max. presence range: | 1.75 m² |
| Max. frontal range: | 3 m |
| Max. Inrush current: | 80 A |
| Sensor type: | passive infrared |
| Optimal installation height: | 2 m |
| Surface finish: | matt |
| Surface: | untreated |
| Material quality: | thermoplastic |
| Detection field diameter on floor: | 6 m |
| Number of switching zones: | 1 |
| Frequency: | 50 Hz |
| Halogen-free: | yes |
| Constant light control: | no |
| HVAC control: | no |
| Forced shutdown: | no |
| Animal corridor: | no |
| Networkable: | no |
| Staircase monitoring: | yes |
| Bypass switch: | no |
| Suitable for wireless transmission: | no |
| Remote controllable: | no |
| With signal unit: | no |
| Alarm function: | no |
| Teach function for response brightness: | no |
| Dimming function with dimming insert: | no |
| Transparent: | no |
| With remote control: | no |
| Suitable for C load: | yes |
| With DALI interface: | no |
| Extension input: | no |
| Forced switching on: | no |
| Suitable for ceiling mounting: | yes |
| Connection type: | Screw terminal |
| Antibacterial treatment: | no |
| Min. inrush current: | 0.01 A |
| Diameter: | 38 mm |
| Installation width: | 27 mm |
| Installation depth: | 77 mm |
| Installation length: | 139 mm |
| Installation diameter: | 32 mm |
| Min. depth of device box: | 77 mm |
