Busch-Presence detector Universal, e-contact, aluminum silver, presence detector, presence detector, Busch-Presence detector Universal, e-contact 12 meter master presence detector with mixed light measurement. For brightness and motion-dependent switching of lighting. With electronic switching contact for LED operation. Detection range (at 3 m installation height): circular: Seated people: up to 10 m, walking people: up to 12 m. Extension of the detection range through master/slave combination. Installation height 23 mm. For semi- and fully automatic operation. Additional on/off option via button input. With continuous light / continuous off function (8 hours), can be activated via intelligent extension input. With brightness-independent test mode for evaluating the detection range. With teach-in function for the brightness switching threshold, IR service handheld transmitter required. With detection display in test mode. Ceiling recessed mounting via integrated spring bracket. Anti-twist protection via additional quick-release clamping. Adjustment elements accessible from the front. Monitoring density: 72 sectors with 640 switching segments. Switch-off delay: approx. 1 min. - 30 min. or short-term pulse adjustable. Remote control via IR service hand-held transmitter 6843. Suitable for suspended ceilings with a panel thickness of 9 to 25 mm. Installation hole size: 68 mm. Control elements: 2 controls for setting the brightness switching threshold and run-on time. Display elements: LED detection and status display. Nominal voltage: 230 V~, +10 % / -10 % Nominal frequency: 50 Hz/60 Hz Outputs: 1x normally open contact, non-potential Load type: 230 V incandescent lamps Nominal power: 3 - 200 W Load type: 230 V~ LEDi Nominal power: 3 - 200 W/VA Opening angle: 360 ° Brightness limit: 5 lux - 2000 lux Installation height: 2 m - 4 m Protection class (device): IP 40 Temperature range (device): -5 °C to 45 °C Dimensions (H x W x D): 94 mm x 94 mm x 59 mm Installation depth: 36 mm 60669-2-1
| Property | Value |
| Depth: | 180 mm |
| Width: | 145 mm |
| Height: | 95 mm |
| Design: | Presence detector |
| Color: | Aluminum |
| Nominal voltage: | 230 V |
| RAL number (similar): | 9006 |
| Material: | Plastic |
| Mounting type: | Flush-mounted |
| Response brightness: | 5 to 2000 lx |
| Protection class (IP): | IP40 |
| Max. switching power: | 200 W |
| Voltage type: | AC |
| Max. range to one side: | 6 m |
| Scan angle: | 360 ° |
| Suitable for wall mounting: | no |
| Min. duty cycle: | 60 s |
| Max. Duty cycle: | 30 min |
| Creep-under protection/rear field monitoring: | yes |
| Temperature: | -5 to 45 °C |
| Adjustable response brightness: | yes |
| Adjustable response sensitivity: | no |
| Max. presence area: | 110 m² |
| Max. frontal range: | 6 m |
| Max. Inrush current: | 350 A |
| Sensor type: | passive infrared |
| Optimal installation height: | 2 m |
| Surface finish: | matt |
| Surface: | painted |
| Material quality: | thermoplastic |
| Detection field diameter on floor: | 12 m |
| Number of switching zones: | 640 |
| Frequency: | 50 to 60 Hz |
| Halogen-free: | yes |
| Constant light control: | no |
| HVAC control: | no |
| Forced shutdown: | yes |
| Animal corridor: | no |
| Networkable: | yes |
| Staircase monitoring: | yes |
| Bypass switch: | no |
| Suitable for wireless transmission: | no |
| Remote controllable: | yes |
| With signal unit: | no |
| Alarm function: | no |
| Teach function for response brightness: | no |
| Dimming function with dimming insert: | no |
| Transparent: | no |
| With remote control: | no |
| Suitable for C load: | yes |
| With DALI interface: | no |
| Extension input: | yes |
| Forced switching on: | yes |
| Suitable for ceiling mounting: | yes |
| Connection type: | Plug-in terminal |
| Antibacterial treatment: | no |
| Min. inrush current: | 0.01 A |
| Installation depth: | 36 mm |
| Installation diameter: | 68 mm |
| Min. depth of device box: | 36 mm |
