Busch-Wächter 220 ProfessionalLINE, anthracite, motion/presence detector, Busch-Wächter AP, Busch-Wächter 220 ProfessionalLINE without IR hand-held transmitter Electronic motion detector for detecting thermal movements. With detection and operating mode display. With floor and rear field monitoring. With level compensation: +/- 30°. With profile lens for best detection. Detection sensitivity can be selected in 3 levels. Monitoring density: 84 sectors with 336 switching segments. All functions microprocessor-controlled. Continuous light (4 hours) and presence simulation can be activated via IR hand-held transmitter. With automatic range stabilization. With automatic interference suppression. With automatic glare protection. With brightness-independent test mode for evaluating the detection area. Additional switch-on option via break button. Switch-off delay: 10 s to 30 min or short-term pulse 1 s adjustable. Nominal voltage: , +10 % / -10 % Nominal frequency: 50 Hz/60 Hz Outputs: 1x normally open contact, non-floating Load type: ohmic, capacitive and inductive Nominal current: 16 AX, at cos 0.6 Nominal power: 3680 W/VA Detection range: front: 16 m, side: 16 m Opening angle: 220 ° Brightness limit: 0.5 lux - 300 lux, daytime operation Mounting height: 2.5 m Protection class (device): IP 55 Temperature range (device): -25 °C to 55 °C Dimensions (H x W x D): 97 mm x 97 mm x 159 mm
| Property | Value |
| Depth: | 105 mm |
| Width: | 97 mm |
| Height: | 102 mm |
| Version: | motion detector |
| Color: | anthracite |
| Nominal voltage: | 230 V |
| RAL number (similar): | 7021 |
| Material: | plastic |
| Mounting type: | surface-mounted |
| Response brightness: | 0 to 1000 lx |
| Protection class (IP): | IP55 |
| Max. switching capacity: | 3680 W |
| Voltage type: | AC |
| Max. range to one side: | 16 m |
| Scan angle: | 220 ° |
| Suitable for wall mounting: | yes |
| Min. duty cycle: | 10 s |
| Max. Duty cycle: | 30 min |
| Creep-under protection/rear field monitoring: | yes |
| Temperature: | -25 to 55 °C |
| Adjustable response brightness: | yes |
| Adjustable response sensitivity: | yes |
| Max. presence area: | 490 m² |
| Max. frontal range: | 16 m |
| Max. Inrush current: | 30 A |
| Sensor type: | passive infrared |
| Optimal installation height: | 2.5 m |
| Surface finish: | matt |
| Surface: | untreated |
| Material quality: | thermoplastic |
| Detection field diameter on floor: | 32 m |
| Number of switching zones: | 336 |
| Detection angle horizontal: | 8 to 220 ° |
| Frequency: | 50 to 60 Hz |
| Sensor swivel range, vertical: | -40 to 90 ° |
| Sensor swivel range, horizontal: | -30 to 30 ° |
| Halogen-free: | yes |
| Constant light control: | no |
| HVAC control: | no |
| Forced shutdown: | yes |
| Animal corridor: | no |
| Networkable: | no |
| Staircase monitoring: | yes |
| Bypass switch: | no |
| Suitable for wireless transmission: | no |
| Remote controllable: | yes |
| With signal unit: | no |
| Alarm function: | no |
| Teach function for response brightness: | no |
| Dimming function with dimming insert: | no |
| Transparent: | no |
| With remote control: | no |
| Suitable for C load: | yes |
| With DALI interface: | no |
| Extension input: | no |
| Forced switching on: | yes |
| Suitable for ceiling mounting: | yes |
| Connection type: | Plug-in terminal |
| Antibacterial treatment: | no |
| Min. inrush current: | 0.01 A |
| Diameter: | 96 mm |
