Busch-Wächter 110 MasterLINE, anthracite, motion/presence detector, Busch-Wächter AP, Busch-Wächter 110 MasterLINE Electronic motion detector for detecting heat movements. Can be remotely controlled using IR handheld transmitter 6841-101. Can be remotely parameterized using IR service handheld transmitter 6842-101. With detection and operating mode display. With floor monitoring. With profile lens for best detection. Detection sensitivity adjustable using IR service handheld transmitter. Detection area set using rotary control. Monitoring density: 25 sectors with 100 switching segments. With integrated dismantling difficulty. All functions microprocessor-controlled. Permanent light (4 hours), light switch-off (4 hours) and presence simulation can be activated using IR handheld transmitter. Reading in the current brightness value as switching threshold using IR handheld transmitter. With automatic range stabilization. With automatic interference suppression. With automatic glare protection. With brightness-independent test mode for evaluating the detection area. Individual adjustment of the detection area using the enclosed, cut-to-size cover film. Additional switch-on option using the opening button. Switch-off delay: 10 s to 30 min or short-term pulse 1 s adjustable. Nominal voltage: , +10 % / -10 % Nominal frequency: 50 Hz/60 Hz Outputs: 1x normally open contact, non-floating Load type: ohmic, capacitive and inductive Nominal current: 10 AX, at cos 0.6 Nominal power: 2300 W/VA Detection range: front: 12 m, side: 4 m Brightness limit: 3 lux to daytime operation Mounting height: 2.5 m Device protection class: IP 55 Device temperature range: -25 °C to 55 °C Dimensions (H x W x D): 100 mm x 125 mm x 33 mm
| Property | Value |
| Depth: | 33 mm |
| Width: | 125 mm |
| Height: | 100 mm |
| Version: | motion detector |
| Color: | anthracite |
| Nominal voltage: | 230 V |
| RAL number (similar): | 7021 |
| Material: | plastic |
| Mounting type: | surface-mounted |
| Response brightness: | 3 to 150 lx |
| Protection class (IP): | IP55 |
| Max. switching capacity: | 2300 W |
| Voltage type: | AC |
| Max. range to one side: | 4 m |
| Scan angle: | 110 ° |
| Suitable for wall mounting: | yes |
| Min. duty cycle: | 10 s |
| Max. Duty cycle: | 30 min |
| Creep-under protection/rear field monitoring: | yes |
| Temperature: | -25 to 55 °C |
| Adjustable response brightness: | yes |
| Adjustable response sensitivity: | yes |
| Max. frontal range: | 12 m |
| Max. Inrush current: | 80 A |
| Sensor type: | passive infrared |
| Optimal mounting height: | 2.5 m |
| Surface finish: | matt |
| Surface: | untreated |
| Material quality: | thermoplastic |
| Number of switching zones: | 1 |
| Horizontal detection angle: | 8 to 110 ° |
| Frequency: | 50 to 60 Hz |
| Halogen-free: | yes |
| Constant light control: | no |
| HVAC control: | no |
| Forced shutdown: | yes |
| Animal corridor: | no |
| Networkable: | no |
| Staircase monitoring: | yes |
| Bypass switch: | no |
| Suitable for wireless transmission: | no |
| Remote controllable: | yes |
| With signal unit: | no |
| Alarm function: | no |
| Teach function for response brightness: | no |
| Dimming function with dimming insert: | no |
| Transparent: | no |
| With remote control: | no |
| Suitable for C load: | yes |
| With DALI interface: | no |
| Extension input: | no |
| Forced switching on: | yes |
| Suitable for ceiling mounting: | no |
| Connection type: | other |
| Antibacterial treatment: | no |
| Min. inrush current: | 0.01 A |
