Busch-Wächter 280 MasterLINE, alpine white, motion/presence detector, Busch-Wächter AP, Busch-Wächter 280 MasterLINE including IR hand-held transmitter Electronic motion detector for detecting heat movements. Can be remotely controlled via IR hand-held transmitter 6841-101 (included in delivery). Remotely parameterizable via IR service hand-held transmitter 6842-101. With detection and operating mode display. With floor and rear field monitoring. With profile lens for best detection. Detection sensitivity adjustable via IR service hand-held transmitter. Monitoring density: 110 sectors with 440 switching segments. With integrated dismantling difficulty. All functions microprocessor-controlled. Continuous light (4 hours) and presence simulation can be activated via IR hand-held transmitter. Reading in the current brightness value as switching threshold via IR hand-held transmitter. With automatic range stabilization. With automatic interference suppression. With automatic glare protection. With brightness-independent test mode for evaluating the detection area. Individual adjustment of the detection area using the enclosed, cut-to-size cover film. Additional switch-on option using the opening button. Switch-off delay: 10 s to 30 min or short-term pulse 1 s adjustable. Nominal voltage: , +10 % / -10 % Nominal frequency: 50 Hz/60 Hz Outputs: 1x normally open contact, non-potential Load type: ohmic, capacitive and inductive Nominal current: 16 AX, at cos 0.6 Nominal power: 3680 W/VA Detection range: front: 16 m, side: 16 m Opening angle: 280 ° Brightness limit: 0.5 lux - 300 lux, daytime operation Mounting height: 2.5 m Protection class (device): IP 55 Temperature range (device): -25 °C to 55 °C Dimensions (H x W x D): 115 mm x 125 mm x 141 mm
| Property | Value |
| Depth: | 141 mm |
| Width: | 125 mm |
| Height: | 115 mm |
| Version: | motion detector |
| Color: | white |
| Nominal voltage: | 230 V |
| RAL number (similar): | 9010 |
| Material: | plastic |
| Mounting type: | surface-mounted |
| Response brightness: | 0 to 1000 lx |
| Protection class (IP): | IP55 |
| Max. switching capacity: | 3680 W |
| Voltage type: | AC |
| Max. range to one side: | 16 m |
| Scan angle: | 280 ° |
| Suitable for wall mounting: | yes |
| Min. duty cycle: | 10 s |
| Max. Duty cycle: | 30 min |
| Anti-creep protection/rear field monitoring: | yes |
| Temperature: | -25 to 55 °C |
| Adjustable response brightness: | yes |
| Adjustable response sensitivity: | yes |
| Max. range, frontal: | 16 m |
| Max. Inrush current: | 80 A |
| Sensor type: | passive infrared |
| Optimal installation height: | 2.5 m |
| Surface finish: | matt |
| Surface: | untreated |
| Material quality: | thermoplastic |
| Detection field diameter on floor: | 32 m |
| Number of switching zones: | 1 |
| Detection angle horizontal: | 8 to 280 ° |
| Frequency: | 50 to 60 Hz |
| Sensor swivel range, vertical: | -30 to 30 ° |
| Sensor swivel range, horizontal: | -30 to 30 ° |
| Halogen-free: | yes |
| Constant light control: | no |
| HVAC control: | no |
| Forced shutdown: | yes |
| Animal corridor: | no |
| Networkable: | no |
| Staircase monitoring: | yes |
| Bypass switch: | no |
| Suitable for wireless transmission: | no |
| Remote controllable: | yes |
| With signal unit: | no |
| Alarm function: | no |
| Teach function for response brightness: | no |
| Dimming function with dimming insert: | no |
| Transparent: | no |
| With remote control: | yes |
| Suitable for C load: | yes |
| With DALI interface: | no |
| Extension input: | no |
| Forced switching on: | yes |
| Suitable for ceiling mounting: | no |
| Connection type: | other |
| Antibacterial treatment: | no |
| Min. inrush current: | 0.01 A |
