Safety or escape sign light with one-sided light emission in accordance with DIN EN 60598-1, DIN EN 60598-2-22, DIN 4844-1 and DIN EN 1838. Modular light consisting of: Light housing made of 850°C glow wire-resistant, halogen-free polycarbonate for tool-free assembly on the quick assembly kit. Including clear protective cover and three pictogram films (arrow right, left, bottom, in accordance with ISO 7010). As a safety light: Symmetrical light distribution for surface illumination with at least 1lx in accordance with DIN EN 1838 for light point heights up to 9.5 m. Maximum distance between lights: > 10 m from 3 m light point height and > 13 m from 5 m light point height (calculation basis: at least 1lx in the middle of the escape route, maintenance factor = 0.8). As an escape sign: Illumination in accordance with DIN 4844-1: average luminance of the white contrast color Lm >= 500 cd/m². Long service life > 50,000 hours due to optimized LED operating conditions. Special LED converter with integrated monitoring module for individual luminaire monitoring with 20-digit address switches. Mixed operation of the switching types (standby light, permanent light or switched permanent light) within a circuit without additional data or switching lines to the luminaires in conjunction with suitable group or central battery systems with STAR technology is possible. Permissible temperature range: -20°C to + 40°C. The quick assembly kit is not included in the scope of delivery and must be ordered separately. Mounting type: Wall mounting Light source: LED Lamp power: 4 W Switching: Other Housing material: Plastic Housing color: Gray Cover material: Plastic, opal Type of marking: One-sided only Suitable for type of marking: Sticker Monitoring device: Monitoring module (centrally supplied system) Ball-proof: No Switching type: Maintained operation/standby operation With remote switch connection (VDE 0100-718,0108-100): Yes Feed-in: Central (central battery) Nominal voltage: 220 - 240 V Protection class: II Protection type (
| Property | Value |
| Housing color: | gray |
| Protection rating (IP): | IP41 |
| Protection class: | II |
| Voltage type: | DC |
| Nominal voltage: | 220 to 240 V |
| Detection range: | 17 m |
| Length: | 342 mm |
| Width: | 95 mm |
| Height/depth: | 60 mm |
| Max. System power: | 5.8 W |
| Rated luminous flux according to IEC 62722-2-1: | 390 lm |
| Operating device: | LED operating device, current-controlled |
| Light source: | LED not replaceable |
| Impact resistance: | IK03 |
| Socket: | without |
| With remote switch connection: | no |
| Cover material: | Opal plastic |
| With light source: | yes |
| Monitoring device: | Monitoring module (centrally supplied System) |
| Housing material: | plastic |
| Suitable for marking type: | sticker |
| Feed: | central (central battery) |
| With pictogram: | yes |
| Light distributor: | diffuser lens/optics/panel |
| Rated service life L70/B50 at 25 °C: | 50000 h |
| Luminaire with limited surface temperature D-mark according to EN 60598-2-24: | no |
| Rated ambient temperature according to IEC 62722-2-1: | -20 to 40 °C |
| Power factor: | 0.611 |
| Wiring type: | suitable for through wiring |
| Conductor cross section: | 2.5 mm² |
| Connection type: | Plug connection |
