Description
Features
Reviews
Thin-walled heat shrink tubing. Applications: Insulating, bundling, marking, protection against corrosion, mechanical protection. Properties: Thin-walled, without thermoplastic adhesive, can be labelled, resistant to chemical influences, stabilised against UV rays, free from substances that impair paint wetting, non-corrosive, infusible, highly flexible, very good electrical properties, high tensile strength, cold flow resistant (heat-stable), self-extinguishing (except transparent). Scope of delivery: Thin-walled heat shrink tubing on a roll.
| Property | Value |
| Nominal diameter in inches: | 1 inch |
| Wall thickness after shrinking: | 0.89 mm |
| Inner diameter before shrinking: | 25.4 mm |
| Inner diameter after shrinking: | 12.7 mm |
| Length: | 50 m |
| Operating temperature: | -55 to 135 °C |
| Design: | thin-walled |
| Color: | gray |
| Material: | Polyolefins (PO-X) |
| With inner adhesive: | no |
| Shrinkage ratio: | 2:1 |
| Printable: | yes |
| UL approval: | yes |
| Halogen-free: | no |
| Type: | Heat shrink |
Features
HAB
SR1F 25.4-12.7 grey
Minimal order
50 pieces
Manufacturer
HAN
144137
GTIN
4010311031378
Version
Thin-walled
Printable
Yes
Operating temperatur
-55 to 135 °C
Color
Halogen free
No
Inner diameter after shrinkage
12.7 mm
Inner diameter before shrinking
25.4 mm
Length
50m
With inner adhesive
No
Nominal diameter in inches
Inch
Shrinkage rate
2:1
Type
Heat shrink
UL approval
Yes
Wall thickness after shrinkage
0.89 mm
Material
Polyolefins (PO-X)
No reviews yet — your comment may be first.
All reviews 0
