Description
Features
Reviews
Thin-walled heat shrink tubing. Areas of application: Insulating, bundling, marking, protection against corrosion, mechanical protection. Properties: Thin-walled, without thermoplastic adhesive, can be labelled, resistant to chemical influences, stabilised against UV rays, free from substances that impair paint wetting, non-corrosive, infusible, highly flexible, very good electrical properties, high tensile strength, cold flow resistant (heat-stable), self-extinguishing (except transparent). Scope of delivery: Thin-walled heat shrink tubing in sections.
| Property | Value |
| Nominal diameter in inches: | 1/4 inch |
| Wall thickness after shrinking: | 0.64 mm |
| Inner diameter before shrinking: | 6.4 mm |
| Inner diameter after shrinking: | 3.2 mm |
| Length: | 1.2 m |
| Operating temperature: | -55 to 135 °C |
| Design: | thin-walled |
| Material: | Polyolefins (PO-X) |
| With internal adhesive: | no |
| Shrinkage ratio: | 2:1 |
| Printable: | yes |
| UL approval: | yes |
| Halogen free: | no |
| Type: | Heat shrink |
Features
HAB
SR1F 6.4-3.2/1200 clear
Minimal order
10 pieces
Manufacturer
HAN
203270
GTIN
4010311115474
Version
Thin-walled
Printable
Yes
Operating temperatur
-55 to 135 °C
Halogen free
No
Inner diameter after shrinkage
3.2 mm
Inner diameter before shrinking
6.4 mm
Length
1.2m
With inner adhesive
No
Nominal diameter in inches
1/4 inch
Shrinkage rate
2:1
Type
Heat shrink
UL approval
Yes
Wall thickness after shrinkage
0.64 mm
Material
Polyolefins (PO-X)
No reviews yet — your comment may be first.
All reviews 0
