Ratchet ring and open-end wrenches for ratcheting loosening or quick tightening of screws and nuts in one go without setting with the ring ratchet. On one side an open-end or open-end wrench with 15 degree offset, on the other side a ring wrench of the same width with built-in ratchet mechanism with special advantages: Ratchet with fine teeth: 72 teeth = only 5 degrees minimum swivel angle. Left and right rotation is achieved by simply turning the wrench and not by means of an annoying switch lever that often gets moved unintentionally. Despite the ratchet, the wrenches are very narrow. This makes the tools particularly suitable for use in confined spaces. 12-edge ring with flank drive, ie the drive is no longer via the screw head corners, but on the flanks, which means that a much higher power transmission is achieved and the edges of screw heads and nuts are protected. Made of chrome-vanadium steel, drop-forged, specially hardened, highly polished, nickel-plated and hard chrome-plated. Very high torque transmission, exceeds DIN requirements. 15mm
| Property | Value |
| Design low-sparking: | no |
| Suitable for toggle pin: | no |
| Cranked: | yes |
| Head width, jaw side: | 32 mm |
| Head width, ring side: | 28.5 mm |
| Head height, jaw side: | 11.5 mm |
| Head height, ring side: | 7.4 mm |
| Length: | 200 mm |
| With toggle pin: | no |
| Wrench size Jaw side: | 15 mm |
| Wrench size ring side: | 15 mm |
| Protective insulation 1000 V: | no |
| Ratchet design: | yes |
| Number of corners: | 12 |
