The circuit breakers in the S 200 P series protect cables and lines against overload and short circuits in accordance with DIN0100-430 and DIN0100-530. They comply with the construction regulations DIN0641-11 or IEC/EN 60898-1, DIN0660-101 or IEC/EN60947-2 and UL1077. For better visibility when wiring, the connection opening for cables is located above the connection opening for the phase busbar. Conductor cross-sections of up to 25 mm can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous approvals make the S 200 P fit for worldwide use. Each device is subjected to three intensive tests for quality and performance before delivery.
| Property | Value |
| Tripping characteristic: | B |
| Rated current: | 6 A |
| Rated voltage: | 23 V |
| Type of voltage: | AC |
| Frequency: | 50.0 to 60.0 Hz |
| Width in pitch units: | 1 |
| Number of poles (total): | 1 |
| Energy limitation class: | 3 |
| Overvoltage category: | 3 |
| Installation depth: | 69 mm |
| Protection class (IP): | IP20 |
| Rated switching capacity Icn according to EN 60898 at 230 V: | 25 kA |
| Rated switching capacity Icu according to IEC 60947-2 at 230 V: | 25 kA |
| Rated switching capacity Icn according to EN 60898 at 400 V: | 25 kA |
| Pollution degree: | 3 |
| Number of protected poles: | 1 |
| Rated insulation voltage Ui: | 440 V |
| Rated impulse withstand voltage Uimp: | 4 kV |
| Connectable conductor cross-section, stranded: | 0.75 to 25.0 mm² |
| Connectable conductor cross-section, solid: | 0.75 to 25.0 mm² |
