Description
Features
Reviews
multi-pole surge arrester DEHNguard M, type 2 according to EN 61643-11, consisting of a base part and plugged-in protection modules, high device safety due to arrester monitoring with thermo-dynamic control, for protecting low-voltage consumer systems against overvoltages, for use in the lightning protection zone concept at the interfaces 0B- 1 and higher
| Property | Value |
| Protection level: | 3 kV |
| Nominal discharge current (8/20): | 15 kA |
| Maximum continuous voltage AC: | 600 V |
| Nominal voltage AC: | 480 V |
| Mounting type: | DIN rail TH35 |
| Size: | 3 TE |
| Signaling on the device: | optical |
| With remote signaling contact: | yes |
| Test class type 2: | yes |
| Max. conductor cross-section flexible (fine-stranded): | 25 mm² |
| Max. conductor cross-section rigid (single-/multi-stranded): | 35 mm² |
| Protection class (IP): | IP20 |
| Network type TT: | no |
| Network type other: | yes |
| Number of conductors (without earth): | 3 |
| Short-circuit strength (Isccr): | 25 kA |
| Max. discharge current (8/20): | 25 kA |
Features
Max. conductor cross-section rigid (single/multi-wire)
35 mm²
Max. conductor cross-section flexible (fine-stranded)
25 mm²
Protection level
3 kV
With remote signaling contact
Yes
Number of conductors (excluding earth)
3
Network form TT
No
Max. discharge current (8/20)
25 kA
Test class type 2
Yes
Short circuit strength (Isccr)
25 kA
Manufacturer
HAN
952307
GTIN
4013364113312
Size
3 HP
Highest continuous voltage AC
600V
Mounting type
DIN rail TH35
Nominal discharge current (8/20)
15kA
Nominal voltage AC
480V
IP protection)
IP20
Signaling on the device
Optical
No reviews yet — your comment may be first.
All reviews 0
