Thin-bed heating mat with one connecting cable. The self-adhesive thin-bed heating mat with one connecting cable is ready for installation and was specially developed for installation in leveling compound or flexible adhesive directly underneath the floor covering. Due to the low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This underfloor heating system is particularly suitable for subsequent installation in angled and/or large rooms, as there is no need to run the second connection back. The heating cable with additional protective braiding for use with the residual current circuit breaker is attached to a plastic net. The length of the connecting cables is 4.0 m. PTC thermistor type DTWB: 1 x 4m, 2 x 1.0 mm², shielded, voltage: 230 V, specific heating output: 70 W/m², insulation: PVDF / FEP, minimum installation temperature: -5°C, smallest bending radius: 50mm, calculation width 50 cm, delivery width: 48 cm, mat height: 3.2 mm, protection class: IPX7, approval: EN 60335-2-96
| Property | Value |
| Length: | 17500 mm |
| Width: | 500 mm |
| Thickness: | 3.5 mm |
| Connected load: | 615 W |
| Area: | 8.75 m² |
| Power: | 70 W/m² |
| With carrier mat: | yes |
| Fixing of the heating conductor: | glued |
| Number of PTC thermistors: | 1 |
| Length of PTC thermistor: | 4000 mm |
| Suitable as roof heating: | no |
| Suitable as open-air heating: | no |
| Self-adhesive: | yes |
| Design: | Heating cable |
| Connection voltage: | 230 V |
| Resistance: | 86 Ohm |
