The self-adhesive thin-bed heating mat with a connecting cable is ready for installation and was specially developed for installation in leveling compound or flexible adhesive directly underneath the floor covering. Due to the low installation height of only 4.0 mm, it is ideal for the renovation and modernization of bathrooms, showers, kitchens, etc. This floor temperature control system is particularly suitable for subsequent installation in angled and/or large rooms, as there is no need to run the second connection back. The heating cable with additional protective braiding for use with the FI protection circuit is attached to a plastic net. The length of the connecting cable is 4.0 m. PTC thermistor: 4m, 1.0mm, voltage: 230 V, nominal limit temperature: 90°C, specific heating output: 150 W/m, length load: 11W, insulation: PVC / FEP, resistance tolerance: +10% / -5%, minimum installation temperature: 5°C, smallest bending radius: 6 x dA, protection class: IPX7, approval: EN 60335-2-96, mat height: 4.0 mm, calculation width 50 cm, delivery width: 48 cm, area 12.0 m, 0.5 x 24.0 m, power 1800 W
| Property | Value |
| Length: | 24000 mm |
| Width: | 500 mm |
| Thickness: | 3.5 mm |
| Connected load: | 1800 W |
| Area: | 12 m |
| Power: | 150 W/m |
| Application: | Thin bed heating |
| Heating conductor load: | 11 W/m |
| With carrier mat: | yes |
| Fixation of the Heating conductor: | glued on |
| Number of PTC thermistors: | 1 |
| Length of PTC thermistors: | 4000 mm |
| Suitable for damp rooms: | yes |
| With controller: | no |
| Connection voltage: | 230 V |
| Suitable as roof heating: | no |
| Suitable as open space heating: | no |
| With floor temperature sensor: | no |
| With room thermostat: | no |
| Self-adhesive: | yes |
