Description
Features
Reviews
Ready-to-install heating mat with a connecting cable, suitable for embedding in asphalt surfaces. The heating cable meets the requirements of IEC 60800 and EN 62395. With additional protective braiding for use with the residual current circuit breaker. Including a factory-fitted waterproof sleeve and a 10m long PTC thermistor. Voltage: 400 V, nominal limit temperature: 90°C, installation temperature: short-term 240°C, deformation strength 2000 N, tensile strength: 120 N, heating conductor insulation: FEP, PTC thermistor: 1 x 10 m 2.5mm, specific heating output: 300 W/m, resistance tolerance: +10% / -5%, minimum installation temperature: 5°C, smallest bending radius: 5 x dA, protection class: IP X7, area: 3.5 m, 0.50 x 7.00 m, 1050 W
| Property | Value |
| Length: | 7000 mm |
| Width: | 500 mm |
| Thickness: | 7 mm |
| Connected load: | 1050 W |
| Area: | 3.5 m |
| Power: | 300 W/m |
| Application: | Direct floor heating |
| Heating conductor load: | 30 W/m |
| With carrier mat: | yes |
| Fixation of the Heating conductor: | glued on |
| Number of PTC thermistors: | 1 |
| Length of PTC thermistors: | 10000 mm |
| Suitable for damp rooms: | yes |
| With controller: | no |
| Connection voltage: | 400 V |
| Suitable as roof heating: | no |
| Suitable as open space heating: | yes |
| With floor temperature sensor: | no |
| With room thermostat: | no |
| Self-adhesive: | no |
Features
Connected load
1050 W
Connection voltage
400 V
Number of PTC thermistors
1
Fixing of the heating conductor
Glued on
Suitable as roof heating
No
Suitable as Open space heating
Yes
Length of the PTC thermistor
10000 mm
With carrier mat
Yes
HAB
83900163 DTI 300 1050W 400V
Manufacturer
HAN
83900163
GTIN
5703466192696
Application
Direct underfloor heating
Width
500 mm
Performance
300 W/m
Length
7000 mm
With room thermostat
No
Self-adhesive
No
Strength
7 mm
No reviews yet — your comment may be first.
All reviews 0
