Residual current circuit breakers (RCCB) switch off the power supply when dangerously high fault currents occur. In this way they protect people, animals and systems. Devices in the DRCCB 5 series are compact two-pole or four-pole residual current circuit breakers with a self-test function. Type A switches are sensitive to pulse and alternating current. This function is independent of the mains voltage. Self-test (ST) switches regularly and automatically carry out a function test of the residual current circuit breaker. This takes place for the system without interruption and without additional wiring, as the required power supply is integrated. Properties: - monthly self-test, - signaling of the operating status via LEDs, - configurable auxiliary contact Mounting type: - quick attachment to a mounting rail - installation position as required - feed-in from above Areas of application: - the devices are used wherever electrical systems must not be switched off or are difficult to access. This can be, for example, B. IT systems or telecommunications systems, agricultural operations, small wind turbines or sewage treatment plants. - Using an optional Modbus interface module, the switching state of the RCCB can be transmitted for remote monitoring.
| Property | Value |
| Rated current: | 40 A |
| Number of poles: | 4 |
| Rated residual current: | 0.3 A |
| Width in modular spacing: | 7 |
| Surge current strength: | 3 kA |
| Short-time delayed type: | yes |
| Rated breaking capacity: | 0.63 kA |
| Protection class (IP): | IP20 |
| Additional devices integrated: | other |
| Mounting type: | DIN rail |
| Rated switching current of additional device: | 40 A |
| Fault current type: | A |
| Rated voltage: | 400 V |
| Installation depth: | 66.1 mm |
| Rated voltage of additional device: | 400 V |
| Frequency: | 50 Hz |
| Control voltage type of additional device: | AC |
| Additional devices fitted at the factory: | Monitoring unit |
| Short-circuit strength (Icw): | 10 kA |
| Selective type: | no |
