Faster installation thanks to innovative luminaire construction. Combination of LED device carrier and cover. Individually replaceable branded components for lowest maintenance costs UV-stable, shatter-proof IK08/IP66 polycarbonate housing with frosted cover ensures shadow-free light distribution 5-pin through-wiring with two internal luminaire connection terminals 2 complete press studs and screw caps Rust-proof stainless steel fasteners with integrated anti-theft device Mounting accessories included (chain/ceiling/wall mounting) including rear wall punchings The D mark of this luminaire with limited surface temperature is a basic requirement for luminaires in fire-hazardous locations (DIN EN 60598-2-24,0711-2-24) This LED luminaire is suitable for use in food processing plants. This means that it can also be used in areas certified according to the International Featured Standard (IFS) or British Retail Consortium (BRC). Sustainable product design through easily replaceable components
| Property | Value |
| Max. System power: | 27 W |
| Rated luminous flux according to IEC 62722-2-1: | 3860 lm |
| Length: | 1540 mm |
| Width: | 100 mm |
| Height/depth: | 80 mm |
| Protection rating (IP): | IP66 |
| Protection class: | I |
| Luminaire with limited surface temperature 'D-mark': | no |
| Nominal voltage: | 220 to 240 V |
| Housing color: | gray |
| Housing material: | plastic |
| Color temperature: | 4000 K |
| Impact resistance: | IK08 |
| Color rendering index CRI: | 80-89 |
| Suitable for ceiling mounting: | yes |
| Rated service life L80/B10 at 25 °C: | 50000 h |
| Suitable for wall mounting: | no |
| Voltage type: | AC |
| With Motion detector: | no |
| Beam angle: | extremely wide beam>80° |
| With light source: | no |
| Light source: | LED not replaceable |
| Rated ambient temperature according to IEC62722-2-1: | -20 to 45 °C |
| With control gear: | yes |
| Cover material: | opal plastic |
| Without dimming function: | yes |
| With light sensor: | no |
| Control gear: | LED control gear, current-controlled |
| Suitable for recessed mounting: | no |
| Light color: | white |
| Suitable for computer workstations in accordance with EN 12464-1: | no |
| Suitable for strip light configuration: | no |
| Suitable for pendant suspension: | no |
| Suitable for surface mounting: | yes |
| Suitable for emergency lighting: | no |
| Covering of the luminaire with thermal insulation material possible: | no |
| DMX dimming: | no |
| Dimming DSI: | no |
| With air slots: | no |
| Dimming LineSwitch: | no |
| Dimming potentiometer (device-integrated): | no |
| Dimming 0-10 V: | no |
| Dimming GPRS: | no |
| Dimming 1-10 V: | no |
| Dimming manufacturer-specific: | no |
| Dimming DALI: | no |
| Dimming Mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Dimming depending on operating device: | no |
| Power factor: | 0.9 |
