Nominal current of the LEDs is only 38% of the max. current, resulting in extremely high efficiency and an above-average service life of >100,000 hours + The pressure equalization valve extends the service life of the seals and prevents condensation from forming in the luminaire + Glare limitation as per UGR + 3-step MacAdam binning guarantees a consistent color temperature + Aluminum core board for perfect heat management + High-quality Meanwell® industrial power supply with 6 KV surge protection + DALI dimmable + Intelligent, maintenance-friendly product design + Suitable for central battery + Ball-proof thanks to satin-finished 4 mm polycarbonate + The D-mark of this luminaire with limited surface temperature is a basic requirement for luminaires in fire-hazardous areas (DIN EN 60598-2-24,0711 - 2 - 24) + This LED luminaire is suitable for use in food processing plants. This means that it can also be used in areas that are validated according to the International Featured Standard (IFS) or British Retail Consortium (BRC).+ This luminaire has a cover made of shatter-proof polycarbonate and the option of ball-proof installation and therefore meets the criteria for ball-proof safety according to DIN 18032-3:1997-04 and DIN 57710-13:1981-05.
| Property | Value |
| Max. System power: | 135 W |
| Rated luminous flux according to IEC 62722-2-1: | 22000 lm |
| Housing color: | Aluminium |
| Housing material: | Aluminium |
| Protection class (IP): | IP67 |
| Outer diameter: | 380 mm |
| Light source: | LED not replaceable |
| Protection class: | I |
| With light source: | no |
| With control gear: | yes |
| Suitable for recessed mounting: | no |
| Height/depth: | 120 mm |
| With motion detector: | no |
| Color temperature: | 5000 K |
| Nominal voltage: | 110 to 276 V |
| Rated service life L80/B10 at 25 °C: | 80000 h |
| Beam angle: | extremely wide beam>80° |
| Color rendering index CRI: | 80-89 |
| Suitable for Ceiling mounting: | yes |
| Impact resistance: | IK10 |
| Luminaire with limited surface temperature 'D-mark': | no |
| Luminous flux: | 22000 lm |
| Cover material: | opal plastic |
| Covering of the luminaire with thermal insulation material possible: | no |
| Voltage type: | AC |
| Light color: | white |
| Suitable for track mounting: | no |
| Suitable for clamp mounting: | no |
| Suitable for pendulum suspension: | no |
| Suitable for platform/floor mounting: | no |
| Suitable for truss mounting: | no |
| With light sensor: | no |
| Suitable for surface mounting: | yes |
| Suitable for cable system: | no |
| Brushed surface: | no |
| Dimming depending on operating device: | no |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DALI: | yes |
| Dimming DMX: | no |
| Dimming DSI: | no |
| Dimming potentiometer (device-integrated): | no |
| Dimming GPRS: | no |
| Dimming LineSwitch: | no |
| Dimming manufacturer-specific: | no |
| Dimming mains voltage modulation: | no |
| Dimming Trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Without dimming function: | no |
| Rated ambient temperature according to IEC62722-2-1: | -40 to 60 °C |
| Power factor: | 0.99 |
| Suitable for VDU workstations according to EN 12464-1: | no |
