Universal LED module (24V constant voltage) for easy and quick replacement of almost all lamps in existing ceiling and wall lights. Simple wiring with full flexibility thanks to integrated constant current drivers. The module only needs to be supplied with 24V DC. Secure hold of the module thanks to 2 pre-installed neodymium magnets Through-wired spring pressure connection terminals at both ends Dimmable via our 24V PWM power supplies, e.g. DALI Set consisting of 12 LED modules including 20 matching connectors Up to 4 light modules can be operated in series at 20W each Can be individually cut to length every 10cm (2 mounting holes and additional soldering surfaces per 10cm) In addition, 10 mounting holes are available for alternative fastening per 50cm module Cable can be used for single-wire wiring (rigid conductor 0.5-0.75mm²) Incl. release tool for releasing a cable that is already plugged into the plug-in terminal connection ESD contact protection up to 8kV for the entire module
| Property | Value |
| Lamp wattage: | 20 W |
| Color temperature: | 4000 K |
| Luminous flux: | 2720 lm |
| Energy efficiency class: | D |
| Protection class (IP): | IP20 |
| Length: | 500 mm |
| Width: | 20 mm |
| Height: | 15 mm |
| Shape: | round |
| Color: | white |
| Operating voltage: | 24 V |
| Suitable for traffic information board signaling: | no |
| Suitable for traffic lights: | no |
| Suitable for variable message signs: | no |
| Suitable for rail traffic: | no |
| Number of LEDs: | 2835 |
| Suitable for constant current: | no |
| Suitable for general lighting: | yes |
| Suitable for constant voltage: | no |
| External operating device required: | no |
| Voltage type: | DC |
| Lamp voltage: | 24 V |
| Light color according to EN 12464-1: | neutral white 3300 to 5300 K |
