Description
Features
Reviews
High-quality residual current circuit breaker/circuit breaker combination, independent of mains voltage, contact position indicator red - green, terminal rear plug protection, tristable locking slide - enables removal from an existing busbar system, extensive range of accessories can be retrofitted, large selection of rated residual currents, rated currents up to 40 A, tripping characteristics B, C, D, rated switching capacity 10 kA, suitable for use outdoors (construction site power and outdoor distribution) down to -25 °C
| Property | Value |
| Tripping characteristic: | B |
| Rated current: | 13 A |
| Rated residual current: | 0.03 A |
| Rated voltage: | 240 V |
| Frequency: | 50 Hz |
| Number of poles (total): | 2 |
| Width in modular spacing: | 2 |
| Residual current type: | A |
| Installation depth: | 75.5 mm |
| Rated breaking capacity according to IEC 60947-2: | 15 kA |
| Surge current strength: | 0.25 kA |
| Protection class (IP): | IP20 |
| Energy limitation class: | 3 |
| Overvoltage category: | 3 |
| Pollution degree: | 2 |
| Switching neutral conductor: | yes |
| Number of protected poles: | 1 |
| Voltage type: | AC |
| False tripping protection: | no |
| Rated insulation voltage Ui: | 500 V |
| Rated impulse withstand voltage Uimp: | 4 kV |
| Rated breaking capacity according to EN 61009: | 10 kA |
| Rated short-circuit breaking capacity Icn according to EN 61009-1: | 10 kA |
| Shutdown characteristic: | instantaneous |
| With locking device: | no |
| Ambient temperature during operation: | -25 to 40 °C |
| Connectable conductor cross-section, single-wire: | 1 to 25 mm² |
| Connectable Stranded conductor cross-section: | 1 to 25 mm² |
Features
Shutdown characteristics
Without delay
Rated short-circuit breaking capacity Icn according to EN 61009-1
10 kA
HAB
FRBMM-B13/1N/003-A B13A 30mA
Manufacturer
HAN
170704
GTIN
4015081672769
Connectable conductor cross-section solid
1 to 25 mm²
Connectable conductor cross-section stranded
1 to 25 mm²
Number of protected poles
1
Trigger characteristics
B
Rated breaking capacity according to EN 61009
10kA
Rated breaking capacity according to IEC 60947-2
15kA
Rated residual current
0.03A
Rated insulation voltage Ui
500V
Rated voltage
240V
Rated impulse withstand voltage Uimp
4kV
Rated current
13 A
Width in pitch units
2
Installation depth
75.5 mm
Energy limitation class
3
False trigger protection
No
Residual current type
A
Frequency
50Hz
With locking device
No
Switching neutral conductor
Yes
Number of poles (total)
2
IP protection)
IP20
Voltage type
AC
Surge current strength
0.25kA
Ambient temperature during operation
-25 to 40 °C
Degree of contamination
2
Overvoltage category
3
No reviews yet — your comment may be first.
All reviews 0
