The PIR motion detector detects movements inside the building. The device is powered by two AAA batteries (included) or a power supply (106291, not included) and can therefore be easily installed anywhere (screwed and glued). A separate, rotating 'mounting bracket' (106292) can be ordered to make setting up the motion detector easier. Channel A (for lighting) sends a switching command depending on movement, brightness and switch-off delay. Channel B (for alarm functions) sends a switching command when movement is detected, regardless of brightness and time delay (channel B activated for approx. 145s). The number of detection pulses to be evaluated can be set for both channels. All settings are made directly on the device with the front cover removed. An LED makes setting up the sensor easier.
| Property | Value |
| Number of channels: | 2 |
| Optimal installation height: | 2.2 m |
| Color: | white |
| Design: | motion detector |
| Motion type: | Surface-mounted |
| KNX bus system: | no |
| Max. range to one side: | 12 m |
| Max. range frontal: | 12 m |
| Horizontal detection angle: | 0 to 110 ° |
| Min. Duty cycle: | 30 s |
| Max. Duty cycle: | 30 min |
| Vertical detection angle: | 0 to 90 ° |
| Detection field diameter on floor: | 12 m |
| Response brightness adjustable: | yes |
| Teach function for response brightness: | no |
| Self-learning switch-off delay: | no |
| Radio bus system: | no |
| LON bus system: | no |
| Powernet bus system: | no |
| Other bus systems: | xComfort |
| Material: | Plastic |
| Material quality: | Thermoplastic |
| Surface: | untreated |
| Surface finish: | matt |
| RAL number (similar): | 9003 |
| With bus connection: | no |
| Extension input: | no |
| Crawl-under protection/rear field monitoring: | no |
| Animal corridor: | no |
| Staircase monitoring: | no |
| Transparent: | no |
| KNX radio bus system: | no |
| Bidirectional radio: | yes |
| Operating mode switch: | yes |
