The water leakage sensor detects the leakage of liquids and issues an acoustic alarm on the one hand, and a potential-free relay contact is also switched on on the other. As long as liquid is detected, the alarm is issued. Warning: If an alarm is triggered, even by touching the sensor with your hand, and you are too close to the sensor, this can damage your hearing!!! The sensor element can also be removed and installed using a cable independently of the evaluation device. The device is powered by a 9V battery (6LR61). To integrate the sensor into the Eaton wireless system, the relay contact must be connected to a binary input 2x signal contact (265627) in mode 2. Use with the binary input 2x230VAC (265626) is NOT permitted!!! (Warning: ensure correct wiring!) The device is attached using screws or adhesive strips. Screws and dowels included. Battery included
| Property | Value |
| Mounting type: | Surface-mounted |
| Protection class (IP): | IP42 |
| Design: | Leakage sensor |
| KNX bus system: | no |
| Radio bus system: | no |
| Color: | white |
| LON bus system: | no |
| Powernet bus system: | no |
| Other bus systems: | without |
| With bus connection: | no |
| With DCF77: | no |
| Acoustic signal: | yes |
| With heating: | no |
| RAL number (similar): | 9010 |
| Analog input: | no |
| Weather station: | no |
| Bus system KNX radio: | no |
| Bidirectional radio: | no |
