The Einhell battery charger CE-BC 10 M is an intelligent battery charger, adapted to the technically advanced and powerful batteries of modern motor vehicles. The main focus of the development is on fast, gentle charging of the batteries so that the longest possible service life at full power is achieved. The battery charger with microprocessor control is suitable for a wide variety of vehicle battery types and has a range of technical protection and care mechanisms. Operating the charger is easier than with conventional devices thanks to a detailed charge display. The smart control electronics analyze the type and condition of the connected battery and initiate the optimal mode based on requirements. The trickle charge function protects and preserves the battery for a permanently ideal charge level. This makes the CE-BC 10 M suitable for all vehicle types, expressly also for seasonal vehicles with long downtimes: Instead of allowing the battery to slowly drain completely and thus risking a deep discharge, the battery is gently kept at its optimal level by means of trickle charging. The trickle charge relieves the battery cells and extends the service life, preventing the avoidable, costly replacement of a vehicle battery damaged by deep discharge. Cars, motorcycles or scooters are ready for use immediately at the start of the season. A winter charging mode has been developed especially for outside temperatures below 5° Celsius. The device is also equipped with a reconditioning mode, which can breathe new life into deeply discharged batteries, and a supply mode for use as a power supply. The Einhell battery charger is equipped with automatic overcharge, short circuit and reverse polarity protection: These protective mechanisms protect both the charger and the battery. The LCD battery voltage and charging progress display shows at a glance what charge level the battery is at and what mode the charger is set to. The fully insulated battery terminals make it easy and safe to connect the batteries to the Einhell battery charger. The housing is provided with a hanging loop for attachment to the wall.
| Property | Value |
| Type: | Charger |
| Color: | red/black |
| EAN: | 4006825640335 |
| Manufacturer no.: | 1002245 |
| Charger: | Input voltage, 220-240 volts |
| Display: | Display: LCD battery voltage and charging progress display |
| Operation: | Winter charging mode for outside temperatures below 5° C, reconditioning mode for charging deeply discharged batteries, power supply mode for use as Power supply |
| Simultaneously chargeable batteries: | 1 piece |
| Power source: | Socket socket |
| Safety: | Electronic overcharge, short circuit and reverse polarity protection, protection class IP65: Dustproof and protected against water jets |
| Feature: | Charging current Min. (arith./eff.) - Max. (arith./eff.) at 12 V DC.: 2 / [-] - 10 / [-] A, intelligent battery charger with microprocessor control, multi-stage charging cycle, microprocessor controlled and monitored, for gel, AGM, maintenance-free and low-maintenance lead-acid batteries, trickle charge function for a permanent, ideal charge level, optimal for seasonal vehicles with long downtimes (convertible/motorcycle), increase in battery life through Charging process, fully insulated battery terminals |
| Further information: | The Einhell all-rounder is suitable for gel batteries, AGM, as well as maintenance-free and low-maintenance lead-acid batteries. The CE-BC 10 M automatically adjusts to the battery voltage of 12 V vehicles. The multi-stage charging cycle of the Einhell battery charger is automatically monitored and adjusted by the microprocessor control. |
| Area of application: | Vehicles |
| Dimensions: | Width: 160 mm x Height: 75 mm x Depth/Length: 300 mm |
| Weight: | 692 grams |
