The Einhell car battery charger CE-BC 30 M is an intelligent battery charger, adapted to the technically advanced and powerful batteries of modern motor vehicles. The intelligent battery charger with microprocessor control is suitable for a wide variety of vehicle battery types and has a range of technical protection and care mechanisms. The main focus of the development was on fast, gentle charging of the batteries so that the longest possible service life is achieved at full power. Operating the charger is easier than with conventional devices thanks to a detailed charging display. The Einhell all-rounder is suitable for gel batteries, AGM, as well as maintenance-free and low-maintenance lead-acid batteries. The CE-BC 30 M is suitable for 12V and 24V batteries. The multi-stage charging cycle of the Einhell battery charger is automatically monitored and adjusted by the microprocessor control. The smart control electronics analyze the type and condition of the connected battery and initiate the optimal mode as required. The trickle charge function protects and preserves the battery to ensure a permanently ideal charge level. This makes the CE-BC 30 M suitable for all vehicle types, including seasonal vehicles that are not in use for long periods of time: Instead of allowing the battery to slowly drain completely and thus risking a deep discharge, the battery is gently kept at its optimal level using trickle charging. The trickle charge relieves the load on the battery cells and extends the service life, thus preventing the avoidable, costly replacement of a vehicle battery damaged by deep discharge. Cars, motorcycles or scooters are ready for use immediately at the start of the season. The Einhell battery charger can support the battery with 100 A starting current (max. 5 seconds) using the jump start function. After briefly charging a capacitor, the device can carry out a jump start process to start the engine immediately - similar to bridging a second vehicle. The Einhell battery charger is equipped with automatic overcharge, short circuit and reverse polarity protection: These protective mechanisms protect both the charger and the battery. The LED battery voltage and charging progress display shows at a glance the charge level of the battery and the mode the charger is set to. The fully insulated battery terminals make the Einhell battery charger easy and safe to connect.
| Property | Value |
| Type: | Charger |
| Color: | red/black |
| EAN: | 4006825643350 |
| Manufacturer no.: | 1002275 |
| Charger: | Input voltage, 230 volts |
| Display: | LED battery voltage and charging progress display |
| Batteries that can be charged simultaneously: | 1 piece |
| Power source: | Socket socket |
| Safety: | Electronic Overcharge, short circuit and reverse polarity protection |
| Feature: | Charging current Min. (arith./eff.) - Max. (arith./eff.) at 12 V DC: 3 / [-] - 30 / [-] A. Charging current Min. (arith./eff.) - Max. (arith./eff.) at 24 V DC: 4 / [-] - 15 / [-] A. Intelligent battery charger with microprocessor control, multi-stage charging cycle, microprocessor controlled and monitored, 2 in 1: charging and jump starting with one device, trickle charge function for a permanent, ideal charge level, all-round battery charger for a wide range of battery types, for gel, AGM, maintenance-free and low-maintenance lead-acid batteries, ideal for seasonal vehicles with long downtimes (convertible/motorcycle), use extends the battery life, fully insulated battery terminals, ergonomic handle for optimal Transport |
| Further information: | The Einhell all-rounder is suitable for gel batteries, AGM, as well as maintenance-free and low-maintenance lead-acid batteries. Selectable voltage 12V/24V to adapt to vehicle battery. The multi-stage charging cycle of the Einhell battery charger is automatically monitored and adjusted by the microprocessor control. |
| Area of application: | Vehicle |
| Dimensions: | Width: 37.5 cm x Height: 29.7 cm x Depth/Length: 43 cm |
| Weight: | 10.9 kg |