Ceiling motion detector for indoor use. 360 degree area monitoring. Attractive flat design. Automatic switching on and off of the lighting. Quick and easy setting of the brightness threshold and switching duration. The device consists of the sensor head and a power unit with a permanently connected connecting cable (length 35 cm). Installation of the sensor head in a 63 mm ceiling cut-out. Mains voltage: AC 220-240 V, 50 Hz. Max. switching current: 10 A, AC 220-240 V, cos Phi 0.6. Nominal power: -LED lamps: 200 W. Incandescent lamps AC 230 V: 1000 W. Halogen lamps AC 230 V: 1000 W. Halogen with electronic transformer: 250 VA. Halogen with iron core transformer: 500 VA. Fluorescent tubes: 200 VA. capacitive load (6 A test current): 21 uF. capacitive load (10 A test current): 14 uF. Compact fluorescent lamps: 3x23 W. Upstream fuse: 10 A. Own consumption: < 2 W. Detection angle: 360 degrees. Range: radius of max. 4 m (at 3 m installation height). Light sensor (sensitivity): 5-2000 lux. Time setting: from approx. 5 s to approx. 8 min, tolerance 3-7 s. Switching mode: automatic. Connection: 3-wire, neutral conductor required. Operating temperature: at room temperature. Protection class: IP 20. EC directives: Low Voltage Directive 2006/95EC and EMC Directive 2004/108/EC. Color: white. Dimensions (LxWxH): sensor 99.7x80.2x45 mm. Power section: 105.3x56.7x33.5 mm. Net weight: sensor 70 g, power section 105 g. Color: white.
| Property | Value |
| Max. Range to one side: | 4 m |
| Optimal installation height: | 2.5 m |
| Design: | motion detector |
| Color: | white |
| Mounting type: | Surface-mounted |
| Response brightness: | 2000 lx |
| Protection class (IP): | IP20 |
| Max. switching capacity: | 1000 W |
| Max. Inrush current: | 10 A |
| Nominal voltage: | 230 V |
| Sensor type: | passive infrared |
| Voltage type: | AC |
| Surface finish: | glossy |
| Material: | plastic |
| Surface: | untreated |
| Material quality: | other |
| Max. Frontal range: | 4 m |
| Detection field diameter on floor: | 8 m |
| Min. duty cycle: | 5 s |
| Max. Duty cycle: | 8 min |
| Switch-off delay: | 480 s |
| Horizontal detection angle: | 360 ° |
| Frequency: | 50 Hz |
| Halogen-free: | yes |
| Adjustable response brightness: | yes |
| Creep-under protection/rear field monitoring: | yes |
| Constant light control: | no |
| HVAC control: | no |
| Forced shutdown: | no |
| Animal corridor: | no |
| Networkable: | no |
| Staircase monitoring: | yes |
| Bypass switch: | no |
| Suitable for wireless transmission: | no |
| Remote controllable: | no |
| Response sensitivity adjustable: | no |
| With signal unit: | no |
| Alarm function: | no |
| Teach function for response brightness: | no |
| Dimming function with dimming insert: | no |
| Transparent: | no |
| With remote control: | no |
| Suitable for C load: | no |
| With DALI interface: | no |
| Extension input: | no |
| Forced switching on: | no |
| Scan angle: | 360 ° |
| Suitable for ceiling mounting: | yes |
| Suitable for wall mounting: | no |
| Connection type: | Screw terminal |
| Antibacterial treatment: | no |
| Width: | 105.3 mm |
| Height: | 56.7 mm |
| Depth: | 33.5 mm |
