Universal LED dimmer module, black For ohmic, inductive or capacitive loads, e.g. dimmable LED lamps, incandescent lamps, dimmable wound transformers or electronic transformers. (Phase control or phase control). The universal dimmer module automatically detects the connected load. Do not connect mixed loads. The dimmer module is controlled with mechanical buttons in parallel operation. When installing the dimmer module in combination with a button, a deep (60 mm) installation box must be used. With screw terminals. Nominal voltage: AC 230 V, 50 Hz. Switching capacity: LED lamps: 4-100 VA (RC mode). 4-20 VA (RL-LED mode). Incandescent lamps: 5-200 W. Halogen lamps: 5-150 W (230 V). 5-200 VA (NV with dimmable wound transformer). 5-200 VA (low voltage with dimmable electronic transformer). Neutral conductor: not required. Connection terminals: screw terminals for max. 2.5 mm. Fuse: 16 A circuit breaker. Dimensions: 45x40x21 (HxWxD). Properties: -short-circuit proof. overload proof. overheat proof. soft start. memory function. automatic load detection. min./max. limit adjustable. operating mode RL-LED mode adjustable. Note: Information on dimming LED lamps can be found on the Internet at Schneider-Electric Dimmertest. http://schneider-electric.dimmer-test.com. Color: black.
| Property | Value |
| Dimming leading edge: | yes |
| Dimming trailing edge: | yes |
| Mounting type: | flush-mounted |
| Color: | gray |
| Suitable for protection class (IP): | IP20 |
| Operating type: | other |
| Halogen-free: | yes |
| Composition: | Base element with complete housing |
| Load type: | universal and LED retrofit |
| Series dimmer: | no |
| Extension input: | yes |
| Light value memory: | yes |
| Can be used with button: | yes |
| Can be used with motion detector: | no |
| Can be used with presence detector: | no |
| Can be used with timer: | no |
| Can be used with radio button: | no |
| Can be used with IR button: | no |
| Mounting type: | other |
| Material: | other |
| Material quality: | other |
| Surface: | untreated |
| Surface finish: | matt |
| Frequency: | 50 Hz |
| Device width: | 40 mm |
| Device height: | 45 mm |
| Device depth: | 20 mm |
| Rated power: | 200 VA |
| Rated voltage: | 230 V |
| Transparent: | no |
| App control via Bluetooth: | no |
| Connection type: | Screw terminal |
| Wire cross section: | 2.5 mm |
| Min. depth of device box: | 66 mm |
