The universal temperature controller insert with touch display can be used to regulate the room or floor temperature. It is operated via a touch display. Electric underfloor heating, radiators or actuators can be connected to the controller. The thermostat can be operated in three different modes: Room air mode: The internal temperature sensor records the temperature and regulates it. Floor mode: The floor sensor, available as an accessory, records the floor temperature and regulates the electric underfloor heating. Dual mode: The internal temperature sensor records the room temperature and regulates it. At the same time, the floor sensor monitors the floor temperature and limits it to the preset maximum temperature. This mode is particularly recommended for temperature-sensitive parquet or laminate floors. Rated voltage: AC 230 V, 50 Hz Rated load (ohmic): 16 A Rated load (inductive): 1 A, cos phi 0.6 Temperature setting range: Room temperature: 5 - 35 °C Floor temperature: 5 - 50 °C
| Property | Value |
| Color: | other |
| Version: | On/Off |
| Mounting type: | Surface-mounted/flush-mounted |
| Protection class (IP): | IP30 |
| Height: | 70 mm |
| Width: | 70 mm |
| Depth: | 42 mm |
| Type of power supply: | 230 V AC |
| Connection: | three-/four-wire |
| With receiver: | no |
| Measuring range lower value: | 5 °C |
| Measuring range upper value: | 30 °C |
| Sensor external: | no |
| Thermal feedback: | parallel |
| Control characteristics: | other |
| Heating: | yes |
| Number of heating outputs: | 1 |
| Cooling: | no |
| Difference value: | 0.5 K |
| Difference adjustable: | no |
| Temperature readable: | yes |
| With noise level indicator: | no |
| Sensor design: | bimetal |
| With display: | yes |
| Operation: | button |
| With drinking water circuit: | no |
| Contact type: | normally open |
| Max. voltage of the contacts: | 230 V |
| Max. Contact load: | 16 A |
| Protection class (NEMA) : | 1 |
| Explosion-proof: | no |
| Diameter: | 57 mm |
| Class of temperature controller: | IV |
