Eltako 23200902 SU12DBT/1+1-UC 2 channels with astro function timer

2-channel timer with display and Bluetooth. Channel 1 with 1 normally open contact potential-free 16A/250VAC and DX. Channel 2 with 1 OptoMOS semiconductor output potential-free 50mA/12..230VUC e.g. for controlling an electronic relay (ER) or impulse group switch (EGS). With display lighting and astro function. Stand-by loss only 0.1-0.3 watts., Supply voltage and control voltage for the central control 12..230VUC. , Modular device for mounting on DIN-EN 60715 TH35 mounting rail. , 1 pitch unit = 18 mm wide, 58 mm deep., With the patented Eltako Duplex technology (DX), the normally potential-free contact 1 can still switch at zero crossing when switching 230V/50Hz alternating current, thereby drastically reducing wear. To do this, simply connect the N conductor to terminal (N) and L to 1 (L). This results in an additional standby loss of just 0. 1 watt., Up to 60 timer memory locations can be freely distributed across the channels. With date and automatic summer time/winter time changeover. Power reserve without battery approx. 7 days., Each memory location can be assigned either the astro function (automatic switching after sunrise or sunset), the switch-on and switch-off time or a pulse switching time (default setting 2 seconds). The astro switch-on or switch-off time can be shifted by up to ± 2 hours. In addition, a time shift of up to ± 2 hours influenced by the solstices can be entered. With control input (+A1) for central control ON or OFF with priority., The timer is set either via Bluetooth with the app or with the MODE and SET buttons, a key lock is possible., The display lighting switches on when MODE or SET is pressed for the first time., 20 seconds after the last MODE or SET button is pressed, the program automatically returns to the normal display and the display lighting is switched off., Setting the timer with the app:, Press SET, BLE (Bluetooth) and the ID of the timer appear on the display. The connection can now be established with the app (delivery state passkey 123123)., Scan the QR code on the operating instructions, the app guides you through the learning process. After the connection to the app has been established, BLE+ appears on the display. The MODE and SET buttons are now locked., Bluetooth reset (delete any changed passkey): The connection to the app must be disconnected. Press MODE and SET at the same time for 2 seconds, RES flashes on the display. Now press SET for 2 seconds, bLE appears on the display. If you confirm with MODE, the BLE reset is carried out, the passkey is deleted and the delivery state is restored., Set the timer with the MODE and SET buttons:, Set the language: Each time the supply voltage is applied, the language can be selected within 10 seconds using SET and confirmed with MODE. D = German, GB = English, F = French, IT = Italian and ES = Spanish. The normal display then appears: day of the week, time, day and month., Fast forward: With the following settings, the numbers increase quickly if the Enter key is pressed and held down. Releasing and pressing again for a longer time changes the direction., Set the time: Press MODE and then use SET to find the CLOCK function under PRG and select it with MODE. For S, use SET to select the hour and press MODE to confirm. Do the same for M for minute. Set the date: press MODE and then use SET to find the DAT function for PRG and select it with MODE. For J, use SET to select the year and press MODE to confirm. Do the same for M for month and T for day. MO (day of the week) flashes as the last setting in the sequence. This can be set with SET and confirmed with MODE., Further settings