Mobile three-phase meter with CEE plug 16A and CEE coupling 16A. Suitable for indoor and outdoor use. Maximum current 16A, standby loss only 0.5 watts per path. Housing dimensions 180x86x82mm, connection cable 1.5m (incl. plug and coupling). Accuracy class B (1%). This mobile three-phase meter measures the active energy based on the currents flowing between the inputs and outputs. The internal consumption of a maximum of only 0.5 watts of active power per path is not measured and not displayed. The starting current is 40mA. The display can only be read with a power supply. However, the consumption is stored non-volatilely and is immediately displayed again after a power failure. The digital display has 7 digits. Up to 99999.99kWh two decimal places are displayed, from 100000.0kWh only one. The power consumption is shown in the display with a bar that flashes 100 times per kWh.
| Property | Value |
| Calibrated: | yes |
| Pole type: | four-wire |
| Meter type: | electronic |
| Display type: | digital |
| Accuracy class: | B |
| Maximum current (Imax): | 80 A |
| Nominal voltage (Un) NL: | 230 V |
| Protection class (IP): | IP54 |
| Frequency: | 50 Hz |
| Energy type: | Active power |
| Nominal current (In): | 10 A |
| Design: | Direct measurement |
| Nominal voltage (Un) LL: | 400 V |
| Number of digits: | 7 |
| Suitable for: | Reference |
| Backstop: | yes |
| Approval: | Measuring Instruments Directive |
| Interface design: | other |
